User manual BLAUPUNKT TP DX-V MULTIMEDIA GB

[. . . ] 35 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 International telephone information . . . . . . . [. . . ] "T-STORE" appears in the display. When the procedure is complete, the station in memory location one on the FMT level is played. 44 È Hold down the softkey, 4, indicating "SCA" for longer than one second. "SCAN" is shown on the display for a short time. The memory levels are scanned one after anoth- RADIO OPERATION When the program type has been selected and the search started, the device changes from the current station to the nearest station transmitting the selected program type. Note: If no station is found offering the chosen program type, the station that was being received most recently is restored. If the selected station, or another station from the station chain, starts to transmit the desired program type at a later time, the device changes automatically from the current station, or out of CD, cassette tape, MiniDisc or CD changer operation (depending on what is fitted to the car radio), and switches over to the station with the desired program type. Switching PTY on and off In order to use the PTY function DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH er, and the memory location from "ST1" to "ST6" currently being sampled is displayed with light and shade reversed. Stopping the SCAN, continue listening to a station PTY-EON È Press the softkey, 4, indicating "SCA" again. The scanning process is stopped, and the last station sampled remains active. Adjusting the sample duration (Scantime) È Press the MENU button, 8. È Press the or button, 7, as often as is necessary for "SCANTIME" to appear in the display. È Adjust the desired sampling time with the < key, 7. È Press the OK button, 5 or the MENU button, 8, to leave the menu. Note: The sampling duration that is selected is also applied to the scanning in CD, tape cassette, MiniDisc and CD changer operation (depending on how the radio is equipped). È press the TUNE button, >, when the radio is operating. È Press the or button, 7, as often as is necessary for "PTY LANG" to appear in the display. È Press the MENU button, 8. È Press the or button, 7, as often as is necessary for "SHARX" to appear in the display. or buttons, 7, in order to switch SHARX on or off. "NO SHARX" means that the function is not active, while "SHARX ON" means that the bandwidth selection is operating automatically. È Press the or button, 7, in order to switch between the languages "DEUTSCH", "ENGLISH" or "FRANCAIS". È Press the È Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. 46 RADIO OPERATION È Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. TRAFFIC INFORMATION DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Traffic Information (only in EUROPE tuner mode) You car radio is equipped with an RDS-EON receiver. EON (Enhanced Other Network) stands for the broadcasting of station information within a broadcasting network. If a traffic announcement (TA) is made, your radio will tune automatically from a non-traffic-information station to a traffic-information station with the broadcasting network. The radio then reverts to the programme previously heard once the traffic announcement is over. Switching between stereo and mono When radio reception is poor you can switch the mode to mono. The changeover from stereo to mono is executed smoothly. The radio plays in stereo after being switched on. [. . . ] È Press the button, 7, as often as is necessary for "AUX OFF" or "AUX ON" to appear in the display. If "AUX ON" is displayed, the input has already been switched on. È Press the or buttons, 7, in order to switch AUX on or off. The settings are then saved. È Press the OK button, 5 or the MENU Note: If the AUX input is switched on it can be selected with the CDC button, =. 59 PRE-AMPLIFIER / SUBOUT TECHNICAL DATA Pre-amplifier / subout You can use the connections provided on your car radio to connect an external pre-amplifier and a subwoofer. We recommend that you use matching products from the Blaupunkt or Velocity ranges. Technical data Amplifier Output power: 4 x 25 Watt sine wave according to DIN 45 324 at 14. [. . . ]