User manual BLAUPUNKT TP DX-V NAV ALPEN

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT TP DX-V NAV ALPEN. We hope that this BLAUPUNKT TP DX-V NAV ALPEN user guide will be useful to you.

Lastmanuals help download the user guide BLAUPUNKT TP DX-V NAV ALPEN.


BLAUPUNKT TP DX-V NAV ALPEN : Download the complete user guide (41 Ko)

Manual abstract: user guide BLAUPUNKT TP DX-V NAV ALPEN

Detailed instructions for use are in the User's Guide.

[. . . ] To avoid the danger of receiving an electric shock and damaged to the monitor, make sure that the monitor cannot become wet or moist. If, however, this does occur, switch the device off, disconnect the electrical cable, and take the monitor to your local specialised dealer as quickly as possible or send it in to our customer service centre. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Notes for the user Only operate the device with the recommended electrical supply of 12V direct current. Make sure you do not place or hang any objects on the electrical cable since this could damage it. Do not attempt to repair the electrical cable if it becomes damaged or severed ­ instead, replace it immediately with a new one. [. . . ] Do not attempt to open or dismantle the monitor, since you could suffer an electric shock as a result. If you detect smoke or a strange smell, disconnect the electrical cable immediately and take it to your local specialised dealer or send it in to our customer service centre. If the monitor's housing is damaged or broken, take it to your local specialised dealer or send it in to our customer service centre. Avoid using the monitor in places where it is subjected to dust, dirt or moisture. Do not install the monitor in places where it is subjected to direct sunlight or extreme temperatures. 19 NOTES FOR THE USER SUPPLIED EQUIPMENT Supplied equipment The monitor is supplied with all parts listed below. If one of the listed parts is missing, please contact your dealer immediately. Do not subject the monitor to the wet or moisture. After installing the monitor, avoid knocking it or pulling it downwards excessively, since this will loosen the screws and the monitor could drop off. Standard package Monitor (including mounting fixture) Remote control with battery IR-Headphones 500 cm long, 8-pin system cable (only for AV signal converter) Operating instructions 20 USING FOR THE FIRST TIME Using the interior light There are three settings for the interior light: OFF, DOOR and ON (see diagram below). DOOR: With this setting, the lights only come on when the vehicle's doors are opened. ON: The lights are switched on. OFF DOOR ON Circuit diagram 21 DANSK PORTUGUÊS W = White = Connection to the sensor B = Black = Ground R = Red = Electrical connection ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH Using for the first time Notes: There is no electrical cable connected to position "B", since "B" is connected to the ground via two screws. The power supply must be 12 volts. USING FOR THE FIRST TIME Changing the light bulb To fit a new bulb, proceed as follows: Wiring Bulb for the main unit Light cable for the main unit Set the light switch to "OFF". To adjust settings in the OSD menu VOLUME: To adjust the volume BRIGHTNESS: To adjust the brightness CONTRAST: To adjust the contrast COLOR: To adjust the colour TINT: To adjust the tint MISC: To open the submenu EXIT: To close the OSD menu OSD menu Main menu Submenu Press the "SRC" button on the main unit or "MENU" on the remote control to open the main menu. Use "EXIT" to close the OSD menu again. In the main menu, select the "MISC" option to display the following choice of options. Select "MAIN MENU" to return to the main menu and then "EXIT" to close the OSD menu. VOLUME BRIGHTNESS CONTRAST COLOR TINT MISC EXIT + ZOOM: FULL SPEAKER: OFF REVOLVE: LEFT RIGHT REVOLVE: UP DOWN RESET PICTURE MAIN MENU 26 OPERATION FM CHAN: Use this option to select the FM channel. The specifications are as follows: TV system FM frequency (MHz) in steps of 0. 2 MHz USA OFF / 88. 1 - 91. 9 JAPAN OFF / 77. 1 - 80. 9 PALB/G OFF / 88. 1 - 91. 9 PALD/K OFF / 88. 1 - 91. 9 PALA/I OFF / 88. 1 - 91. 9 AUTO PROG (Automatic programming): Please refer to the "AUTO PROG" function in the section describing the remote control. AV OUT: Select this option to switch between the AV output modes "Constant" and "Variable". You can use the and buttons to switch between the following settings: Full = for displaying a 4:3 signal on a 16:9 screen format ZOOM1 = Picture height expansion, zoom factor = 4/3 WIDTH1 = Picture height expansion and different picture width change Normal = Side ratio of 4:3 27 DANSK PORTUGUÊS ESPAÑOL SVENSKA ZOOM2 = Zoom factor = 8/7, picture height expansion WIDTH = Different picture width change WIDTH2 = Picture height expansion and different picture width change ZOOM3 = vertical expansion, zoom factor = 8/7 SPEAKER: Select the "SPEAKER" option and then use the and buttons to switch the monitor loudspeaker on/off. REVOLVE: This function and the and buttons allow you to reverse the picture (i. e. RESET PICTURE: Select the "RESET PICTURE" option to reset the adjusted parameters back to their factory defaults. MAIN MENU: If you are in the submenu, you can return to the main menu by selecting this option. NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH IR-HEADPHONES 1. 4. Infrared sensors On/off switch Stereo / mono Volume control 5. Switch on the audio/video device that is connected to the transmitter. [. . . ] Switch on the audio/video device that is connected to the transmitter. Adjust your preferred volume using the volume control on the left whilst making sure you do not obstruct the sensors. 2. Move the on/off switch on the headphones to the on position. 28 OFF / ON IR-HEADPHONES 4. Reception position The headphones/receiver receive audio signals within certain ranges from any direction and directly. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT TP DX-V NAV ALPEN

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT TP DX-V NAV ALPEN will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag