User manual BLAUPUNKT TP DX-V NAV GB

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to contact the dealer or an experienced Radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. CAUTION · The use of optical instruments with this product will increase eye hazard. · Because the invisible laser beam in this compact disc player is harmful to the eyes, do not attempt to disassemble this cabinet. [. . . ] (Same mute level is also activated by cellular mute (if connected). "TEL MUTE" appears. ) Mute or cellular mute is terminated by pressing any button. (Cellular mute is also ended by ending cellular telephone use. ) If volume level lower than mute level, lower volume level is maintained, even though "MUTE" appears. Automatic Source Tone Memory Bass and treble adjustments made are source specific, allowing different settings for each source (FM, AM, CD, Auxiliary and/or Changer) as is Loudness. Bass, Treble, Balance and Fade Press Mute/AUDIO for more than 1/2 second to access Bass. Subsequent presses access Treble mode, then Balance/Fader mode. Bass -Adjust from +7 to -7 at 2 dB/step using >> or /\ to increase bass, << or V to decrease. Treble - Adjust from +7 to -7 at 2 dB/step using >> or /\ to increase treble, << or V to decrease. Balance/Fade ("BAL/FADE") Adjust balance from L9 (all the way left) using << to R9 (all the way right) using >>. Adjust fader from F9 (sound only from the front) using /\ to R9 (sound only from the rear) using V. Loudness (LD) Press LD to increase sound of low and high frequencies. (In AM Bank, press BND for 2 seconds to activate AM Travel Store. ) T STORE appears, followed by seek-type display of frequency and preset numbers. Beginning at the bottom of the band, TS stores six strongest stations, one on each of the six preset buttons, in decreasing order of signal strength, and returns to preset 1. Pressing any presets or BND or scan cancels search operation. When source is changed during Travel Store, operation completes itself, despite source change. "STA SCAN" appears, then frequency blinks (along with preset number if appropriate) during scanning. Unit stops at receivable stations for scan time set under Menu. Unit continuously scans until user stops scan by pressing SCA, another tuning button, SRC, or MENU button. Preset Scan Tuning Press PS/SCA for more than 2 seconds. "PS SCAN" appears, then frequency and preset number blink during scanning. Unit starts at FM1/Preset 1 (or AM/Preset 1) and proceeds through all presets (in FM all three banks) and returns to frequency tuned prior to PS activation and stops. Stops earlier if user presses another tuning button, SCA, SRC, or MENU button. [. . . ] Press << or >> buttons to select next character position. Display blinks "STORING" twice. (There is no time-out from Disc Name Access & Edit modes. ) 21 LIST TPM Display Priority & Disc Names: (See Display Options on page 13. ) Changing a Disc Name Repeat steps 1 to 10 in Disc Naming, changing only those characters that you wish to change. Erasing One Disc Name Access Disc Access mode under Menu (See Disc Naming). [. . . ]