Detailed instructions for use are in the User's Guide.
[. . . ] To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
FCC NOTE (for U. S. A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. · Connect this equipment into an outlet on a circuit different form that to which the receiver is connected. [. . . ] English Some buttons do not work subject to models and some specific discs.
6. Connecting to TV/Monitor/Power (AV output & input)
Audio IN(R) Audio IN(L) ACC (Red) Video IN Battery (Yellow)
6. Connecting to Amplifier with built-in Dolby Digital Decoder
Digital Out Video Out VIDEO IN
6. Connecting to VCR/CAMCORDER/GAME PLAYER
VCR CAMCODER GAME PLAYER
To change DVD mode to Aux mode while a disc is (being) played in DVD mode, press "DVD/TV/EXT" button of the remote controller.
6. Antenna (DVD-ME3 only)
AUDIO OUT VIDEO OUT RL Audio IN(R) Audio IN(L) Video IN
7. DVD Player Operations
After connection to the system is completed according to Chapter 6, check the operation by using the following steps.
7-1. TV Operation (DVD-ME3 only) STEP 1:
With Power "ON", press "DVD/TUNER/AUX" button one time from DVD Mode, TV Channel "2" is displayed as default value.
Press the POWER button. PBC FUNCTION
PBC ON: If `Playback Control" is written in VCD 2. 0 disc or the case, specific scene or information can be selected using main menu displayed on the TV/monitor. 1) Press number buttons (0~9) to select a desired main menu displayed. when selecting a desired main menu, the submenu is displayed on TV/monitor. Audio (Selecting audio language)
Press the Audio button in remote control several times to select various audio languages. FAST (Forward/search)/skip button
Press the Fast button in remote control repeatedly, screen is played forward at 2X, 4X, 8X, and 20X. (Subject to disc type, disc can be played at 2X, 3X, 4X, 6X, and 8X).
8-16. Pause/Step (still picture)
Every time the STEP button is pressed on the remote control, each scene can be displayed. Slow
Each time the SLOW button is pressed on the remote control, It plays 1/2, 1/4, 1/8 times in forward Direction and 1/2, 1/4, 1/8 times in backward Direction. Equalizer
Press the EQUALIZER button to display it on the Screen.
English Insert a DVD disc and press the SETUP button, initial settings screen is displayed. (At times, when the SETUP button is pressed, you are required to input a password, if this occurs input 0000) To exit the initial settings screen, press the SETUP button again. Initial Screen Sub-screen TV DISPLAY TV TYPE PIC MODE GENERAL SETUP Sub-screen NORMAL/PS, NORMAL/LB, WIDE MULTI, NTSC, PAL AUTO, HI-RES, N-FLICKER
ANGLE MARK ON, OFF OSD LANG AUDIO OUT CAPTIONS SCR SAVER ENGLISH ANALOG, SPDIF/RAW, SPDIF/PCM ON, OFF ON, OFF
AUDIO MODE LT/RT, STEREO LINE OUT, RF REMOD STEREO, L-MONO, R-MONO, MIX-MONO OFF, 2/8, 4/8, 6/8, FULL ENGLISH, FRENCH, SPANISH, CHINESE, JAPANESE ENGLISH, FRENCH, SPANISH, CHINESE, JAPANESE, OFF ENGLISH, CHINESE, FRENCH, SPANISH, JAPANESE CHINA, FRANCE, HONG KONG, JAPAN, TAIWAN, GBR, USA 1 G - NO PARENTAL CHANGE RESET
OP MODE DOLBY DIGITAL DUAL MONO SETUP DYNAMIC AUDIO SUBTITLE DISC MENU PREFERENCES LOCALE PARENTAL PASSWORD DEFAULTS EXIT SETUP
9. GENERAL SETUP
In the GENERAL SETUP menu, select audio and video output. 3) PIC MODE This menu is used for setting screen mode, AUTO, HI-RES, and N-FLICKER.
1) TV DISPLAY In initial settings, TV Aspect of screen is set to 4:3. In the TV DISPLAY menu, adjust the appropriate screen type according to the TV set up.
4) ANGLE MARK If the DVD disc supports various watching angles, they can be selected using this menu.
2) TV TYPE This Unit supports various TV signal types. [. . . ] 2) To select another folder, press the STOP button, move to the desired folder by pressing the ARROW (direction) buttons, and press the PLAY button.
11. How to Install Mounting Brackets
Please refer to these special notes before installation & USE of this unit.
· 3. 1" (80mm) discs are not compatible with this unit. · Vertical installation requires use of 3 brackets to secure the unit. · For higher quality sound we recommend converting MP3 files with a sampling frequency of 128kbps or higher. [. . . ]