User manual BLAUPUNKT TP E EXACT W/W F

[. . . ] 9 Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Setting the tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Switching to radio mode . . . . . . . . . . . . . . . . 11 Switching the RDS function on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Try various values (0-5) until you find the best setting. Setting the tuner To ensure that the tuner works properly, the device must be configured for your region. You can choose between Europe (EUROPE) and the USA (N AMERICA). By default, the tuner is set to the region in which the device was sold. If you experience problems with radio reception, please check this setting. These operating instructions refer to the "N AMERICA" setting. Press the MENU button 8. Keep pressing the button : until "TUNER AREA" appears in the display. Press the or button : for longer than two seconds to switch between "EUROPE" and "N AMERICA". Press the MENU button 8 or OK ;. 10 RADIO MODE If you are in CD, CD changer/Compact Drive MP3 or AUX mode, There are various ways of tuning into a station. Automatic seek tuning ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Switching to radio mode Tuning into a station press the FM TS button 5 for FM radio mode. or Press the or button :. press the AM button ?for AM radio mode. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Switching the RDS function on/ off To use the RDS functions, press the RDS button 4. The RDS function is active when RDS lights up in the display with a symbol. Press the or button :. Selecting the waveband / memory bank This unit can receive programmes broadcast over the FM and AM wavebands. "HICUT 0" means that no reduction will be made, "HICUT 3" means a maximum automatic reduction of the treble and interference level will be applied. Press the MENU button 8 or OK ;. Switching bandwidth during interference (SHARX) The SHARX function allows you to largely avoid interference caused by neighbouring radio stations (FM only). Switch on the SHARX function if you experience a high radio station density. Switching SHARX on/off Keep the RDS button 4 pressed until "NAME FIX" appears in the display. To allow scrolling texts to appear in the display again, keep the RDS button 4 pressed until "NAME VAR" appears in the display. Note: If you tune into an already stored station using a different means (e. g. using SCAN or by searching), the "scrolling texts" will be displayed. Press the MENU button 8. Keep pressing the button : until "SHARX" appears in the display. "SHARX OFF" means automatic bandwidth switching is deactivated, "SHARX ON" means it is activated. ;. Setting the display When in radio mode, you have the option of continuously displaying the time or continuously displaying the station name or frequency. Press the Keep the DIS Press the MENU button 8 or OK button 7 pressed until the required display appears. 14 CD MODE You can use this unit to play standard CDs with a diameter of 12 cm. CD-Rs and CD-RWs (CDs that you have "burned" yourself) can generally also be played. Due to the varying quality of CDs, Blaupunkt cannot guarantee that this will work properly. [. . . ] To do this, please see the chapter "Tone and volume balance". Listen to the CD. Evaluate the tone impression according to your taste. Now consult the chart "An aid to adjusting the equalizer" in the "Sound impression" section. 23 EQUALIZER Set the equalizer values as described under "What to do". CLASSIC POP JAZZ ROCK TECHNO SPEECH Settings for these musical styles have already been programmed. Switching the equalizer on/off To switch on the equalizer, hold down the DEQ button < until EQ lights up on the display "EQ ON" is briefly displayed. To switch on the equalizer, hold down the DEQ button < until EQ disappears from the display "EQ OFF" is briefly displayed. Press the DEQ button <. [. . . ]