Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT TP E EXACT W/W SK. We hope that this BLAUPUNKT TP E EXACT W/W SK user guide will be useful to you.
Lastmanuals help download the user guide BLAUPUNKT TP E EXACT W/W SK.
Manual abstract: user guide BLAUPUNKT TP E EXACT W/W SK
Detailed instructions for use are in the User's Guide.
[. . . ] The positive cable must have a cross-section of at least 1 mm. the unit is protected by a quick-acting fuse of 5 A. If you use a motor or electronic antenna, it will be activated when the TIM function is switched on, which will lead to a certain current drain. [. . . ] If you use a motor or electronic antenna, it will be activated when the TIM function is switched on, which will lead to a certain current drain. Note: By means of the support included in delivery you can mount the set in cars with a DIN car radio cut-out of 182 x 53 mm, an installation depth of 165 mm and an instrument panel thickness around the fixing clips of 1 - 20 mm, see fig. For cars with other cut-out dimensions Blaupunkt delivers car-specific installation kits for common car types for 50/52 mm sets. Use enclosed distance plates only for installation kits of 52 mm sets. Please check the dimensions and, if necessary, use a car-specific installation kit, e. When using installation sets for units of 52 mm four distance plates, order number 8 601 055 056 must be used, fig. Connect the positive cable together with distributor to pin 30 (constant power) or pin 15 (positive line connected via ignition) of the fuse holder behind the fuse. If these notes are disregarded, there is danger of destroying the final stages. do not connect speaker outputs to ground!Connection with vehicle's system connector (ISO connector) For vehicles prefitted with ISO connectors pins 1, 2 and 3 of the ± connector must always remain free, fig. Ground cable Do not connect the ground cable to the negative pole of the battery. Route the ground cable to a suitable ground point (car body screw, car body metal sheet) and shorten it accordingly. Remove the insulation from the ground cable and attach the forked cable lug (if necessary, solder it). Scratch off the paint from the contact area of the ground point and lubricate it with graphite grease (important for good ground contact). [. . . ] Route the ground cable to a suitable ground point (car body screw, car body metal sheet) and shorten it accordingly. Remove the insulation from the ground cable and attach the forked cable lug (if necessary, solder it). Scratch off the paint from the contact area of the ground point and lubricate it with graphite grease (important for good ground contact). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT TP E EXACT W/W SK
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT TP E EXACT W/W SK will begin.
