User manual BLAUPUNKT TP E FREESTYLER W/R D

[. . . ] 6 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 International telephone information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Selecting CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Selecting tracks . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Familiarize yourself with the equipment before you start driving. Always make sure that you are still able to hear any warning signals coming from outside the vehicle, such as police or fire engine sirens, at all times. Consequently, you should always select a moderate volume for playing your car audio system while you are driving. Guarantee The scope of the guarantee is determined by the laws in the country where the unit is purchased. Regardless of the legal guarantee regulations, Blaupunkt affords a 12-month guarantee. If you have any questions about the guarantee, please contact your authorized Blaupunkt dealer. Your cash register receipt is a valid guarantee coupon. Installation If you would like to install your new car stereo yourself or add other audio components to the existing ones, then please read the instructions on installation and connection at the end of this manual carefully. International telephone information Have you got any questions on the operation of this equipment or do you require more information?You will find the international telephone and fax numbers on the last page of this manual. Accessories Use only Blaupunkt-approved accessories. Remote control unit The optionally available RC 08 infrared remote control unit allows you to conveniently operate the most important system functions from the steering wheel. 6 THEFT PROTECTION SYSTEM Removable front panel To prevent your car audio system from being stolen, it has been equipped with a removable front panel (release panel). Without the front panel, the car audio system is useless to thieves. Protect your car audio system against theft and take the operating panel with you each time you leave the vehicle. Press the key : repeatedly until "BEEP ON" or "BEEP OFF" appears on the display. Press MENU <. Press : repeatedly until "MUTE LVL" appears in the display. : to select the mute Switch the beep on or off using the keys :. Press level. Once you have completed the setting, press the MENU key < once more. Once you have made your selection, press MENU <. Telephone mute If your car audio system has been equipped with a mobile telephone, it will automatically switch to mute when you use the phone. This will not work unless the mobile phone is connected to the car audio system as described in the installation instructions. The car audio system will be muted to the mute level selected. 9 RADIO OPERATION Radio operation Switching to the radio mode If you are currently using the CD player or CD changer, Adjusting seek tuning sensitivity It is also possible to adjust the sensitivity of the seek tuning function. In this way you can adjust the radio to tune into stations with strong reception signals only, or to those with weaker reception signals as well. press CD·C 8 repeatedly until "RADIO" appears in the display. Selecting wavebands/memory banks Using this car audio system, you can tune into radio stations on the FM and AM wavebands. There are three memory banks for the FM waveband and one memory bank for AM. You can store five stations in each of these memory banks. Press : repeatedly until "SENS" appears in the display. Press :. The currently selected setting will appear in the display. "SENS HI" indicates the highest level of sensitivity, "SENS LO" the lowest. If you select "SENS LO", lo will light up in the display. To switch between the FM wavebands FM1, FM2 and FMT, press FM 2. [. . . ] Stopping PAUSE To stop the MIX function, press 4 (MIX) = repeatedly until "MIX OFF" appears in the display and MIX no longer lights up. Press 2 ( ) = during the pause. Playback will resume. Scanning all of the tracks on all of the CDs (SCAN) To scan all of the tracks on all of the CDs in ascending order, press 5 (SCAN) =. "SCAN" will appear in the display. Stopping the SCAN function To stop the SCAN function, press 5 (SCAN) = again briefly. The track currently scanned will continue playing. [. . . ]