User manual BLAUPUNKT TP E1 R D/NL/FR O.CD

[. . . ] Graphic representation of the adjusted volume level. Display field 2: Radio mode Radio frequency or station name PTY programme type Cassette mode TAPE1/TAPE2 - side of tape being played. Changer mode CD number being played by changer. CD time (elapsed time) Brief indication of functional changes DSC Serves as display and entry field during DSC programming Clock display Miscellaneous Indicates new source (e. g. when changing from radio to cassette) Display field 3: Displays active functions. [. . . ] Radio mode Press the button briefly to display the clock. Cassette mode Press this button to switch the display between the cassette direction and clock indication. Changer mode Press the button briefly to switch the display between the CD number, playback time and clock indication. Theft protection This unit is equipped with a detachable control panel. A car radio without control panel is worthless for thieves. Protect your car radio and detach the control panel when you leave your car. It is very easy to attach and detach the release panel thanks to its specific design. Note: Do not pull the release panel straight out from the chassis, but detach it as illustrated below. Do not expose the release panel to direct sunlight or other heat sources. Detaching the release panel Press the REL button to release the control panel. Then pull it off gently as illustrated. Attaching the release panel Slide the panel (B) from the left to the guide of the chassis (A). Gently push the left side of the panel against the front of the chassis until it snaps into place. Setting the clock · · · Press DSC briefly. For this to work properly you must have already tuned into the stations at least once and "AF" must be active (lights up in the display). 32 Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM stations in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the BA/TS button for 2 seconds. "T-STORE" will appear in the display. Storing stations On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (1, 2, T). On MW/LW, you can also store six stations each (Freiburg RCM 148, Kingston DJ without MW, LW). Changing the scan time The scan time can be selected from between 5 to a maximum of 20 seconds. If you would like to alter the scan time, please refer to the section on "DSC programming - SCANTIME". Recalling stored stations You can recall any stored station at the touch of a button. · Select the waveband by pressing BA/TS. For FM, also choose the corresponding memory bank by pressing the BA/TS button as many times as necessary until the desired bank appears in the display. · Press the corresponding preset button briefly to recall the station. Programme types Turn PTY on. Use << >> to have the last selected programme type displayed and to choose a new one. [. . . ] "MIX-CD" or "MIX-ALL" lights up briefly in display field 2 when you activate this function and each time the title changes. FRANÇAIS The SCAN function will also be cancelled by pressing any other button, except for the volume controls and the AUD and ON buttons. The following options are possible: Mix all titles of one CD ("MIX-CD") or Mix all titles of all CDs ("MIX-ALL"). ENGLISH To stop the Scan function: · Press SRC/SC briefly. The track currently scanned will continue to play. MIX You can have the CD titles played in random order. DEUTSCH DSC programming The car radio has been equipped with DSC (Direct Software Control) to allow you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to them if desired. [. . . ]