User manual BLAUPUNKT TP E2 W/W S/DK/N O. CD

[. . . ] The THs 6902 can be operated in normal as well as in bridged mode (for further details, please refer to the operating instructions that came with the amplifier). In any case, please observe the RMS output power of your amplifier. It must not exceed the RMS power of the THs 6902. In order to achieve a balanced sound, we recommend that you configure the amplifier as follows. [. . . ] In order to achieve a balanced sound, we recommend that you configure the amplifier as follows. First set the volume control to minimum and the crossover control to its middle position. Now play some music on your car sound system that you are very familiar with and that contains some low bass Now slowly increase the volume of the subwoofer until you feel that the sound of the music is well balanced, i. The bass is neither too weak nor overpowering. Now listen to the relationship between deep male voices and the upper bass and also take note of the relationship between the upper bass (kick bass) and the lower bass. The bass should ideally sound crisp and have a clear low bass component, and male voices should neither sound too weak nor should they billow out. If you are happy with the sound then you are already finished with the setup process. If male voices seem to billow out or the low bass is too weak, you should turn the crossover control slightly towards minimum and then resume making your adjustments as described in point 2 onwards. If the bass sounds low but dirty and booming or the male voices sound too weak, you should turn the crossover control slightly towards maximum. Furthermore, you should set the phase control (if present) so that the upper bass sounds as powerful as possible. Leave ample clearance between the cables and other harnesses. use the enclosed cable ducts at sharp-edged holes. Note: We recommend that you operate the THs 6902 in conjunction with our TH series amplifiers. The THs 6902 can be operated in normal as well as in bridged mode (for further details, please refer to the operating instructions that came with the amplifier). In any case, please observe the RMS output power of your amplifier. It must not exceed the RMS power of the THs 6902. Do not mount the THs 6902 on the rear shelf, rear seat or at any position which ist open towards the front. blaupunkt recommends the installation in the spare wheel well. Use suitable threaded rods or ratchet straps to provide a secure support (see Fig. To dispose of the product, please use the available waste return and collection systems. [. . . ] blaupunkt recommends the installation in the spare wheel well. Use suitable threaded rods or ratchet straps to provide a secure support (see Fig. To dispose of the product, please use the available waste return and collection systems. In order to achieve a balanced sound, we recommend that you configure the amplifier as follows. [. . . ]