User manual BLAUPUNKT TRAVEL PILOT 200 ITALY

[. . . ] Never operate the TravelPilot DX-N while driving unless the traffic conditions permit. Do not make a destination entry unless your vehicle is stationary. Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . 2 General Information . . . . . . . . . . . . . . . . . . . . . 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For more information on route guidance with map display, refer to the "Quick Reference", "Example of route guidance with map display". If route guidance last used the arrow symbols mode, you can easily switch to the map mode. A selection menu will appear on the bottom left edge of the display. Route guidance will continue in map mode. 2. 25 Allgemeines Kurzanleitung Zieleingabe Touren Zielspeicher Einstellungen Anhang Route guidance Overview 1 2 The driving direction arrow indicates your current vehicle position and driving direction. Left-hand information window contains information on the remaining driving time, driving distance and the status of the function for "traffic congestion" and "TMC". Right-hand information window with arrow symbol and distance bar graph. A coloured line marks the route on the map. Name of the road you are currently travelling on Name of the road onto which the next turn will be made TMC station name for dynamic navigation 26 6 4 2 5 1 7 3 3 4 5 6 7 Selecting the information map (Destination area, Overview) You can activate an information map for the destination area or an overview map for the entire route. The "Settings" menu will appear. A selection list for the type of information to be displayed will appear. The "Settings" menu will appear. Press The map displaying the information selected will appear. Driving time and driving distance on the map The following is displayed on the map as navigation information: ­ Information window on the left indicating: Driving time and driving distance ­ Information window on the right indicating: GPS status, map scale and a compass In addition: ­ TMC station name (only if the unit is able to receive a TMC source) ­ 1. Arrow symbols which indicate the driving recommendations and the driving direction up to the next turn Press OK to open the selection menu. The "Settings" menu will appear. A selection list indicating the available information windows will appear. Mark the information windows you want displayed on the map. A checkmark will indicate the information windows selected. Plus Point: On the top line of the menu you can either select or unselect all of the information windows at once. Once you have selected all of the information windows you want displayed, press . "OK" on the top line of the menu will be marked. [. . . ] If you would like to activate the demonstration mode, select "Demo". Select either the simple demonstration mode ("Normal") or a constant repeat ("Autorepeat"). 2. Note: Destinations and tours programmed during the demonstration mode will not be saved in the destination memory when the demonstration mode has ended. The demonstration mode remains active until the TravelPilot DX-N is restarted or until it is deactivated. [. . . ]