User manual BLAUPUNKT TRAVEL PILOT DX_R52T

[. . . ] In addition, observe the instructions of the devices used in conjunction with this device. This device is intended for installation and operation in a vehicle with 12 V vehicle system voltage and must be installed in a DIN slot. observe the performance limits in the technical data. Repairs and installation, if necessary, should be performed by a specialist. [. . . ] U Select your tuner region with the button ?If you are in CD or AUX mode, u press the SRC button 4 repeatedly until an RDS radio name or a frequency appears on the display. In addition to the display of the station name, you can also use convenient RDS functions (see the next chapter). Switching the display of station names on/off You can switch the display of the station names on or off as needed. When you have finished making your changes, u press the MENU button 3 or wait 5 seconds. REG: At certain times, some radio stations divide their programme into regional programmes providing different content. You can use the REG function to prevent the car radio from switching to alternative frequencies that are transmitting different programme content. When you have finished making your changes, u press the MENU button 3 or wait 5 seconds. When you have finished making your changes, u press the MENU button 3 or wait 5 seconds. There are various ways of tuning into a station. The radio tunes into the next receivable station. The stored station is played if it can be received. ) When you have finished making your changes, u press the MENU button 3 or wait 5 seconds. During seek tuning, you cannot perform any menu settings. Note: As an alternative, you can switch PTY on/off with the TS button 9. To switch PTY on/off using the TS button 9, u press the TS button 9 for longer than 2 seconds. Your device is equipped with an RDS-EON receiver. EON (Enhanced Other Network) ensures that whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic announcement has been played, the system will switch back to the programme that you were listening to before. If you do not want to switch within a broadcasting network or toggle PTY, you can switch EON on or off. When you have finished making your changes, u press the MENU button 3 or wait 5 seconds. When you have finished making your changes, u press the MENU button 3 or wait 5 seconds. [. . . ] Adjusting the level u Press the AUD button : repeatedly until "TRB" appears on the display. u Turn the volume control 5 to adjust the level from -10 to +10. When you have finished making your changes, u wait 5 seconds. As soon as another manual increase is performed, the equaliser switches off. [. . . ]