User manual BLAUPUNKT TRAVELPILOT RNS 149

[. . . ] Enter code number using the multifunction buttons. The first star is extinguished after entry of the first digit. The second star is extinguished after entry of the second digit, etc. The unit switches on automatically after entry of the 4th digit, if this and all other digits have been correctly entered. [. . . ] The function is quit if there is no further actuation within 10 seconds. 51 5DGLR 2SHUDWLRQ 5HJLRQDOLVDWLRQ A regional identification is displayed if regional programmes are broadcast within the programme range of the selected transmitter. If no traffic programme transmitter is selected, the automatic transmitter search is activated by pressing the button and a traffic programme transmitter is selected. 1RWH During the traffic announcement, the desired increase in volume can be set via the volume button. An announcement which is currently being heard can be terminated by pressing the button. The unit then switches back immediately to the previously selected operating mode in the mute condition. However, the next traffic announcement is switched through again. 0XWH IXQFWLRQ VZLWFK RQRII After selection of a TP or EON transmitter, the mute function can be activated by pressing the button briefly. Thereafter, only traffic announcements are switched through. The mute function is cancelled by pressing the button again or by turning the volume control. If no TP or EON transmitter is selected, 087( is displayed on actuating the button. For 087(, no traffic announcements are switched through. 54 5DGLR 2SHUDWLRQ 7HOHSKRQH PXWH IXQFWLRQ The telephone characteristics can be set in the user menu (see also page 66) if a telephone system is installed in the vehicle and the mute function lead for the car telephone is connected to the car radio. For the setting 3+ 2)), the radio is switched to mute if a call is received. The drive components in the cassette mechanism also become dirty. For this reason the cassette mechanism should be cleaned from time to time. The prompt &/($1 appears on the display after each 30 hours running time. Use a cleaning cassette suitable for reverse operation for this purpose. The cleaning cassette should be removed again after 30 seconds. 58 &' 2SHUDWLRQ &RPSDFW 'LVF &' LQVWUXFWLRQV Sound interruptions may occur if the CD is dirty. In order to ensure optimum tone quality, please note the following: Always touch the CD at the edges only. Keep the disc clean and never touch the surface. Protect the CDs against direct sunlight and from heat sources such as heaters etc. Before playing, clean the CD with a commercially available cleaning cloth, wiping from the centre outwards. Solvents such as petrol, thinners or other commercially available cleaners and anti-static sprays must not be used. &RUUHFW , QFRUUHFW , QFRUUHFW &RUUHFW &'V LQVHUW HMHFW Press button briefly; the display folds downwards and the CD slot becomes visible. Insert the disc into the CD slot with the printed side upwards. [. . . ] Subsequently, remove the slides. $ % 70 5HPRYDO , QVWDOODWLRQ *XLGH For removal, the unit must first be unlocked. For this purpose, push in both slides to the second detent position, as shown in illustration A. Subsequently, withdraw the unit with both slides (illustration C). Then remove the slides by pressing the springs on the right and left sides of the unit. [. . . ]