User manual BLAUPUNKT TRAVELPILOT SOUND DOCKING

[. . . ] 1 - On/Off button A Display B Loudspeaker C Sound exit opening (bass reflex) D Compartment for storage battery CR2025 (clock/timer) E Grip opening F AUDIO INPUT and VIDEO IN sockets for feeding sound and image signals G ANTENNA socket for supplied line aerial or optional aerial cable for connecting to an aerial socket H socket for stereo headphones 2 VOL -/+ buttons: Adjusts the volume 3 SEEK </>buttons : Starts seek tuning (FM mode) 4 FM button 5 Station buttons 1-5 6 Pull the securing strips to place the remote control into operation 7 Battery compartment (CR2025) 8 AV button We provide a manufacturer's warranty for our products purchased within the European Union. [. . . ] Have the TravelPilot Sound Docking first checked by the customer service. Next, connect the mains cable with the adapter and then connect it with an outlet (100-240 VAC, 50/60 Hz). To switch off the device, u Press the On/Off button 1 again for longer than 2 seconds Note ü The device plays the audio source with the volume you previously listened to. Adjusting bass and treble Settings can be performed only on the remote Until the hour display flashes. This device can be used to receive radio stations in the FM frequency range and adjust and store FM radio stations. There are three ways of tuning into a station: Tuning into stations automatically (station seek tuning) Tuning into stations manually Selecting stored stations The stored station is called up, provided that it can be received at the current location. The audio signals of the TravelPilot are now also played back via the docking station. the video signal of the VIDEO IN socket F is played back via the TravelPilot if it is set to "My VIDEOS". [. . . ] Spannungsversorgung, Voltage supply Betriebsspannung, Operating voltage Stromaufnahme, Current consumption Im Betrieb, In operation: 10 Sekunden nach dem Ausschalten: 10 seconds after switch-off: Verstärker-Ausgangsleistung Amplifier output power max. [. . . ]