User manual BLAUPUNKT VELOCITY REFERENCE SUBWOOFER VPW 300

[. . . ] A control solely via the right or left channel is also possible since the low-frequency portion of the music is generally identical on both channels. The preamplifier outputs are connected to the cinch (RCA) sockets directly at the device or alternatively to the multiport connecting cable using a shielded cable. With control via the loudspeaker outputs of the radio, the input connections of the multiport connecting cable are fed to the closest loudspeaker cables (front or rear) on the left and right. [. . . ] Please observe the following safety notes during the installation and connection. When you drill holes, ensure that you do not damage any vehicle components. - If the positive and negative cable are extended, ensure that the cross section is not less than 1. - An incorrect installation can result in malfunctions of the electronic vehicle systems or your car sound system. With respect to accident safety, the Velocity 2Go 5 / 2Go 6 must be installed professionally. A dry location should be selected for the installation location. The Velocity 2Go 5 / 2Go 6 must not be installed on rear shelves, rear seats or other locations that are open to the front. The installation surface must be suitable to accept the enclosed retaining straps or the QuickOut bracket available as an option (7 606 500 190) and provide secure support. To protect the equipment, the +12-V connecting cable must be fitted with a fuse no more than 30 cm from the battery. If you are using non-rechargeable batteries, the charging process is prevented. Please use the return and collection systems available to dispose of the product. The following control settings are recommended as basic setting before the startup: Sensitivity (full range gain) to left stop (minimum), see page 5 / Fig. Subject to changes Connect the enclosed power supply with the "DC-In" socket. Insert the mains plug of the power supply into an energised mains outlet. Always use only the enclosed power supply. Other power supplies can damage the Velocity 2Go 5 / 2Go 6. The Velocity 2Go 5 / 2Go 6 can be operated using 8 commercial 1. 5-V AA batteries as well as 8 rechargeable NiMh AA batteries. [. . . ] 5-V AA batteries as well as 8 rechargeable NiMh AA batteries. We recommend using only powerful NiMh batteries with a capacity of at least 2, 500 mAh to ensure sufficient operating time. The batteries are inserted in the battery compartment bracket while observing the correct polarity (see page 5 / Fig. [. . . ]