User manual BLAUPUNKT VERONA RCR 45

[. . . ] Radio / Cassette Verona RCR 45 Operating instructions 1 2 3 4 5 6 7 19 18 17 16 15 14 8 9 10 11 12 13 3 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Short instructions . . . . . . . . . . . . . . . . . . . . . . . . 18 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This releases the card and puts it in the proper position for being removed. · Now you can pull it out. "Defining" a second KeyCard/ Replacing a KeyCard While operating the unit with the first KeyCard, you can "define" a second one to be also used with the set: · Insert the first KeyCard and turn on the set. · Press the DSC button and select "LEARN KC" with / . The display will switch to "CHANGE". Putting the unit into operation · Turn on the set and introduce the KeyCard into the slot with the contact area showing up (KeyCard tongue pulled out). The car radio is now ready for operation. If a wrong KeyCard is inserted, then "CARD ERR" will appear in the display. In this case please do not go on operating the set. 22 · Press the KeyCard in, which releases the card and puts it in the proper position for being removed. Optical indication for extra security When the car is stationary, the KeyCard tongue can be switched to flash for extra antitheft security. For this, the following requirements must be fulfilled: Permanent 12 V supply and the + ignition lead must be connected correctly (as illustrated in the installations instructions). "LED 1" must be adjusted in the DSC mode. Please refer to chapter "DSC programming LED". Displaying the radio pass data You can use the KeyCard supplied with the unit to display the individual radio pass data such as the model name, the type number (7 6 . . . ) and the serial number: · Press and hold down preset buttons 1 and 6 while switching on the unit. · Press the M·L button within 2 seconds. The radio pass data will move through the display several times. To quit the function: · Press any button. NEDERLANDS 23 PORTUGUÊS ESPAÑOL SVENSKA ITALIANO Remove the first KeyCard and insert the new one while "CHANGE" is still being displayed. Now you can also use the new KeyCard for operating your unit. A maximum of two cards can be used per set. When trying to "define" a third one, the system will automatically delete the access authorisation of that KeyCard which was not used for the "learning" process. · FRANÇAIS ENGLISH DEUTSCH Radio operation with RDS (Radio Data System) The Radio Data System offers you more convenience when listening to FM radio stations. More and more radio stations have begun to broadcast RDS information alongside their programmes. This function is activated when "AF" appears in the display. In order to switch this function on or off, · press the AF button briefly. While searching for the strongest reception signal, the radio may switch to mute briefly. If "SEARCH" appears in the display when 24 Automatic tuning Scrolling through the broadcasting network (only FM) You can use the << >> buttons to tune in stations of your reception area. [. . . ] The message will then come through at this volume. (1 = low) ESPAÑOL SVENSKA NEDERLANDS ITALIANO DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to these if desired. [. . . ]