User manual BLAUPUNKT WIESBADEN CM 84 INSTALLATION INSTRUCTION

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT WIESBADEN CM 84. We hope that this BLAUPUNKT WIESBADEN CM 84 user guide will be useful to you.

Lastmanuals help download the user guide BLAUPUNKT WIESBADEN CM 84.


Mode d'emploi BLAUPUNKT WIESBADEN CM 84
Download
Manual abstract: user guide BLAUPUNKT WIESBADEN CM 84INSTALLATION INSTRUCTION

Detailed instructions for use are in the User's Guide.

[. . . ] Instructions for installation and connection Disconnect the battery ground wire during installation and connection. When drilling a hole, be sure not to damage any vehicle part (battery, cable, fuse, etc. The positive cable must have a cross-section of at least 2, 5 mm2. [. . . ] For cars with other cut-out dimensions Blaupunkt delivers car-specific installation kits for common car types for 50/52 mm sets. Please check the dimensions and, if necessary, use a car-specific installation kit, e. When using installation sets for units of 52 mm four distance plates, order number 8 601 055 056, must be used, fig. Ground cable Do not connect the ground cable to the negative pole of the battery. Route the ground cable to a suitable ground point (car body screw, car body metal sheet) and shorten it accordingly. Remove the insulation from the ground cable and attach the forked cable lug (if necessary, solder it). Scratch off the paint from the contact area of the ground point and lubricate it with graphite grease (important for good ground contact). 5 mm2) to the battery (do not route the cable near the cable harnesses). Connect the fuse holder to protect the positive cable and connect it to the positive pole of the battery (if necessary, drill a hole into the fire wall and use cable ducts). Note: Upon customer request and if the car radio system is operated via the ignition, the switched positive line, installed ex factory, can be connected to a relay (Bosch part no. Install the car radio into the DIN cut-out provided in your car's dashboard ex factory. Prepare the car radio DIN cut-out (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. Grasp behind the car radio cut-out and check how many of the fixing strips of the car radio support can be bent. note: Try to bend as many fixing strips as possible. [. . . ] Sätt in bilradion framifrån i fästanordningen och skjut in, tills hållfjädrarna på sidorna till höger och till vänster griper in (ett tydligt knäpp hörs). Stick in byglar till vänster och till höger i de befintliga hålen i panelen och tryck in så långt, att ett tydligt knäpp hörs (sidofjädrarna går ur ingrepp). En pluskabel (röd) med grov area (2, 5 mm2) dras direkt till batteriet. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT WIESBADEN CM 84

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT WIESBADEN CM 84 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag