User manual BLAUPUNKT XL 220.1

[. . . ] 6 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 International telephone information . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Important information . . . . . . . . . . . . . . 6 Removable front panel . . . . . . . . . . . . . [. . . ] Paging through the broadcasting network (for FM only) If a radio broadcasting network has more than one station, you can page through the "station network". Storing radio stations Storing radio stations manually Select the desired FM memory bank FM1, FM2, FMT or the AM waveband. Tune the radio into the desired station. Press or : to tune into the next station in the network. Press and hold down one of the station preset buttons 1 to 6 > on which you want to store the radio station for longer than two seconds. Note: To take advantage of this function, you must have activated the RDS function. It is only possible to tune into those stations which have been received once before already. Stopping the SCAN function, continuing to listen to the radio station scanned Press MENU 8. Press : repeatedly until "HICUT" appears in the display. "HICUT 0" indicates that the function is switched off; when "HICUT 3" appears, the treble will be automatically cut as far as possible. Press Press OK ;. SCAN will end and the last station scanned will continue playing. Press MENU 8 or OK ;. 12 RADIO OPERATION Interference-dependent bandwidth switching (SHARX) The SHARX function allows you to virtually eliminate interference from neighbouring radio stations. When you are in a reception area with a large number of radio station signals, switch the SHARX function on. Switching SHARX on/off This car audio system has been equipped with a multiband tuner. The tuner can be adjusted to accommodate country-specific requirements. The available regions are: America, Europe, Asia and Thailand. The tuner is not fully functional unless it has been set to the country in which it is used. Adjusting the tuner ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Adjusting the tuner Press MENU 8. The name can be made up of up to eight letters. If you attempt to enter more than 30 names, "FULL" will appear in the display. Entering/editing CD names Repeating individual tracks (REPEAT) To repeat the track currently playing, press 4 RPT >. "REPEAT TRCK" will appear in the display, the RPT symbol will light up. The track will continue to repeat until RPT is deactivated. Stopping the REPEAT function You are listening to the CD you want to name. If you want to stop the REPEAT function, press 4 RPT > again. "REPEAT OFF" will appear briefly in the display, the RPT symbol will no longer light up. CD playback will resume normally. Press MENU 8. Press : to select "CD NAME". Press or : twice. Interrupting playback (PAUSE) Press 3 >. "PAUSE" will appear in the display. Stopping PAUSE The car audio system is now in the edit mode. If the CD you selected does not yet have a name, eight dashes will appear in the display. The first input position will flash. [. . . ] - En cas d'erreur d'installation, des perturbations peuvent survenir dans les systèmes électroniques du véhicule ou dans votre autoradio. - Ne pas brancher les connecteurs du véhicule sur la radio !- Les câbles d'adaptation nécessaires pour le type de véhicule sont disponibles auprès des revendeurs BLAUPUNKT. E Normas de seguridad F Consignes de sécurité Respecter les consignes de sécurité suivantes pendant la durée du montage et du branchement. - Débrancher le pôle (-) de la batterie ! [. . . ]