User manual BLUEANT SUPERTOOTH II

[. . . ] OVERVIEW The SuperTooth II is equipped with Bluetooth Technology and a Digital Signal Processor which allow wireless communications on devices such as Mobile phones, Smartphones and PDA's. It is designed to be a totally portable wireless handsfree kit which will enable the user to communicate freely without holding a phone. The Supertooth II will work with any Bluetooth cellular phones available provided that they respect the Bluetooth Protocol. Don't forget: Drive safely and within the law. [. . . ] When prompted by a beep, say the name you wish to call. Redial Calls the last number dialed from the phone. Press and hold for 3 seconds the Answer key on the Supertooth. Audio Transfer to the phone by accessing the phone's Menu and selecting Transfer Call to Handset. Kit to Phone Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit. " f. REJECTING A CALL Rejecting a call can be done from the Phone by selecting IGNORE or from the Supertooth by pressing the Reject button. Note: It is recommended to create a phone profile to use with the Supertooth. Configure phone volume and ring settings to suit your cars environment. 40 NOKIA WIRELESS AUDIO ADAPTER AD-5B The Nokia Bluetooth adapter supports Bluetooth Headset Profile only, Therefore the Supertooth needs to be placed into Headset Pairing Mode first. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink). Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode. Press the Pick-Up/Hang-Up Button once again for a short time to access Headset Pairing Mode. The SuperTooth is now in the correct pairing mode for the AD-5B (most important). Bring your AD-5B and phone to within about 20 cm from the SuperTooth. Insert the Nokia adaptor into the pop port connector of the 7250 etc 6. Press and hold the Control button on the AD-5B for 10 seconds until the LED flashes alternately red and green. Next, press Once the Control button on the AD-5B to begin the search. [. . . ] The phone will display devices you have searched for previously and also More Devices. The phone now searches for pairable devices to be added. Enter "0000" as the passkey then press Ok. If the pairing is successful, the alternating red/blue lights on the Supertooth will stop. [. . . ]