User manual BLUETREK SUGAR

[. . . ] Please refer to the "Pairing the BLUETREK® SUGAR" section of this manual. English Introduction The BLUETREK® SUGAR headset is a wireless headset based on the Bluetooth® technology. It complies with Bluetooth® 1. 2 protocol, supporting Headset and Hands-free profile. A built-in voice alert is an advanced feature that is now available on your headset. A recorded voice reminds you of the actions in your headset, such as: redial the last number, reject a call, call your favourite number, when your headset needs to be charged and if your headset is connected/disconnected from the handset. [. . . ] BLUETREK SUGAR I 4 English Once the mobile phone detects the headset, a "BLUETREK SUGAR" message will be displayed. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000, then press "yes" or "ok" . Fitting lanyard English Wearing the BLUETREK® SUGAR Two different sizes of ear hooks are included in the pack to suit your ear size. 5 I BLUETREK SUGAR Switching the BLUETREK® SUGAR ON and OFF Switching BLUETREK® SUGAR ON When your headset is off, press and hold the TALK button for about 5 seconds until the blue indicator light is on. A beep (2 tones) can be heard in the speaker. Switching BLUETREK® SUGAR OFF When your headset is on, press and hold the TALK button for about 7 seconds until the red indicator light is on. A beep (2 tones) can be heard in the speaker then release the TALK button. English Making a call Mobile phone with voice recognition . Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded with the phone. To enter these, please refer to your phone's manual. When there is no incoming or active call, press once on the TALK button . Wait for the audio signal sent by the mobile phone (generally a short tone). Speak the name of person you wish to call. BLUETREK SUGAR I 6 Mobile without voice recognition . Make sure both the headset and the mobile phone are ON and in stand-by mode. Dial the number on the phone keypad, after approximately 2 seconds the audio connection will be established. This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www. bluetrek. com. to find out more. English Answering a call When the headset rings, press once on the TALK button to take the call. Ending a call Press once on the TALK button to end an active call. Adjusting the volume To increase the volume during an active call, press the "VOL+" button on the headset. To decrease the volume during an active call, press the "VOL-" button on the headset. 7 I BLUETREK SUGAR To mute the microphone during an active call During an active call, press and hold the VOL+ button for approximately 2 seconds. A periodic tone can be heard in the speaker when the microphone is muted. To end the mute function When the microphone is muted, press and hold the VOL+ button for approximately 2-3 seconds. The periodic tone will end. Transferring a call from BLUETREK® SUGAR to the mobile phone During an active call, double click on the TALK button. This function only works in the Hands-Free Profile. In the Headset profile, you can simply turn off your headset. Transferring a call from the mobile phone to the BLUETREK® SUGAR During an active call on the mobile phone, press once on the TALK button to transfer the call. [. . . ] Before using your headset for the first time, adjust the headset volume to the lowest, then increase the volume gradually until you reach to an acceptable level. High levels of volume may result in hearing loss, avoid using the headset at high volume continuously. If you experience ringing in your ears or muffled speech, consult your doctor immediately and stop using the headset. - Do not drop or try to alter the shape of your headset. [. . . ]