Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLUETREK X2. We hope that this BLUETREK X2 user guide will be useful to you.
Lastmanuals help download the user guide BLUETREK X2.
Detailed instructions for use are in the User's Guide.
[. . . ] please refer to the "Charging the BLUETREK X2" section of this manual. During the charge, the indicator light is red. The indicator light will turn off when the charge is complete. During subsequent charges, the charging should take approximately 2 hour 40 minutes. [. . . ] If pairing success, the indicator light will switch to blue and flashes slowly. If you haven't started the discovery mode within 5 minutes, the headset will switch off. You must then switch on your headset and start the pairing again. The ear hook is made of a soft material which can be shaped to fit your ear. Please refer to the above diagram of how it can be adjusted. Snap the ear hook onto the headset by applying gentle pressure on the base of the ear clamp ring. Switching BLUETREK X2 ON When your headset is off, press and hold the TALK button for about 2 seconds until the blue indicator light is on. A beep (2 tones) can be heard in the speaker. To check if your headset is ON, press once on the TALK button. If the indicator light flashes blue, it means your headset is ON. Switching BLUETREK X2 OFF When your headset is on, press and hold the TALK button for about 5 seconds until the red indicator light is on after the quick blue flashes. A beep (2 tones) can be heard in the speaker then release the TALK Button. Making a call *Mobile phone with voice recognition . Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded with the phone. To enter these, please refer to your phone's manual . When there is no incoming or active call, press once on the TALK button . Wait for the audio signal sent by the mobile phone (generally a short tone). Speak the name of person you wish to call. Make sure both the headset and the mobile phone are ON and in stand-by mode. Dial the number on the phone keypad, after approximately 2 seconds the audio connection will be established. *This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www. Transferring a call from BLUETREK X2 to the mobile phone During an active call, press the TALK button for about 2 seconds. [. . . ] Therefore, if your headset does get wet, dry it completely as soon as possible. Warning: never immerse your headset under water. Do not drop or try to alter the shape of your headset. Do not expose your headset to extreme temperatures. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BLUETREK X2
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BLUETREK X2 will begin.
