User manual BLUMAX ET-08

[. . . ] The red indicator light is displayed during charging. If charging does not start, disconnect the charger, plug it again, and retry. When the battery is fully charged, the red indicator light turns off. Disconnect the charger from the wall outlet and the headset. [. . . ] Select the headset (ET-08) from the list of found devices. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. see the user guide of your phone for details. You only need to pair the headset with your phone once. If the pairing is successful, the headsets blue light will flash 3 times briefly for the first time follow by a single flash every 7 seconds. The headsets name appears in the phone menu where you can view the currently paired Bluetooth devices. To connect the headset to your phone, switch on the headset, make the connection in the Bluetooth menu of your phone, or press and hold the answer/end key. You can set your phone to connect with the headset automatically when the headset is switched on. If you cannot connect the headset to your phone, do as follows: Ensure that the headset is charged, switched on, paired with and connected to your phone. ensure that the Bluetooth feature is activated on your phone. Check that the headset is within 10 meter (30 feet) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic devices. To make a call, use your phone in the normal way when the headset is connected to your phone. If your phone supports redialing with this device, press the volume + key for 3 seconds while no call is in progress. If your phone supports voice dialing with this device, press the answer/end key when no call is in progress, and proceed as described in the user guide of your phone. To answer a call, press the answer/end key, or use the phone keys. If the automatic answer function is set on, the phone automatically answers the incoming call after one ring. To end a call, press the answer/end key, or use the phone keys. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with compatible chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. [. . . ] Its moving parts and electronic components can be damaged. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. Do not drop, knock, or shake the device. [. . . ]