User manual BONTRAGER BICYCLE HELMET

[. . . ] No helmet can protect the wearer against all possible impacts. A severe impact, sharp object, improper use, or incorrect adjustment could cause conditions beyond the protection of the helmet. To be effective, a helmet must fit and be worn correctly. The helmet is designed to be retained by a strap under the lower jaw. [. . . ] Slide the strap adjustor on the left temple strap (Figure 4) until the strap adjustor sits just beneath your left earlobe. Hold the strap adjustor position on the temple strap while you pull the nape strap (Figure 4) through the nape adjustor. The left buckle should almost touch the strap adjustor. Lock the strap adjustor. 2 3 Replacement Policy If your helmet is impacted within the first year of ownership, Bontrager will replace it at no charge. Ship the helmet, postage prepaid, with a copy of your receipt and a description of the accident. We will send you a new helmet upon receipt of your crashed helmet. Figure 3. Operation of the Strap Adjustor 1 Figure 4. Left Buckle (1), Left Temple Strap (2), and Left Nape Strap (3) 5 6 To Adjust the Left Nape Strap 1. With the helmet off, pull the left nape strap (Figure 4) through the back of the helmet (Figure 5) to adjust the position of the left strap adjustor. With the helmet correctly positioned on the head, the left strap adjustor should be just below the earlobe (Figure 6). Both the temple strap and the nape strap should be taut. If necessary, re-adjust the left temple strap (see left). To Adjust the Chinstrap The helmet is designed to be retained by a strap under the lower jaw. The two straps hanging from the right strap adjustor that go under the lower jaw are collectively called the chinstrap (Figure 8). Make sure the chinstrap is correctly threaded through the right buckle (Figure 9). Adjust the length of the chinstrap by sliding it through the buckle. Figure 8. Correct Placement of Chinstrap Figure 5. Strap Position in Back of Helmet Figure 6. Final Position of Left Strap Adjustor Figure 9. Path of Chinstrap Through Buckle and O-ring To Adjust the Right Nape Strap and Right Temple Strap 1. With the helmet off, open the right strap adjustor. Slide the right strap adjustor on the nape strap until the right nape strap is the same length as the left nape strap. Pull the right temple strap through the right strap adjustor until it is the same length as the left temple strap (Figure 7). [. . . ] Micro-Manager Height Positions Figure 16. Micro-Manager Circumference Positions Figure 13. Tightening the Micro-Manager Figure 14. Loosening the Micro-Manager To Adjust the Visor Position To remove the visor, gently pull each snap from the socket in the helmet shell (Figure 17). [. . . ]