User manual BOSCH 509

[. . . ] D Bosch Telecom GmbH Produktbereich Endgeräte Kleyerstr. (0 180) 5 2214 92 Fax (0 180) 5 2214 93 N. V. Rue Henri Genessestraat 1, 10 70 Bruxelles / Brussel Tel. 0800 - 94 495 Robert Bosch A/S Telegrafvej 1, 2750 Ballerup, Tel. [. . . ] Status You have the possibility of checking if your phone is diverted in any of the above mentioned ways. Cancel all You cancel all of your call diverts at the same time. Call divert If you want to divert your incoming calls to another phone number, you have to: 1 Select one of the below mentioned options of call divert. Register your call divert. 2 Different options of call divert Entering call divert gives you the following options: »Divert all calls« »Divert all unanswered« »Divert if busy« »Divert if no reply« »Divert if no contact« »Status« »Cancel all« Register your call divert When you have selected one of the five mentioned options for diverting calls, you will be asked to register the call divert. This means specifying certain features for the call divert. Continues See the following page 18 19 Setup menu Setup menu Call setup (menu 1) Register your call divert Once you have selected »Register« your telephone will guide you through the following steps: Divert delay (only if you have selected to divert »if no reply« or »all unanswered«). This option gives you the possibility of specifying the period of time that elapses before the call is diverted. As appears on your display, you can select »Use default delay« or select a period from 5 to 30 seconds. Finally, you will be asked what number to divert to. Calls can be diverted to a telephone number stored in your phone book or to any other number. Access your phone book by pressing or enter a phone number via the keypad. Note: Your selection of a specific kind of call divert does not only give you the possibility of registrating it. At this level, you also have the possibility of deactivating/activating (see below), the option of seeing the status for this specific kind of call divert by selecting »Status« as well as the option of cancelling this specific kind of call divert by selecting »Cancel«. You find the option of activating/deactivating by selecting the specific call divert you want to activate/deactivate and then select »Deactivate« or »Activate«. If you try to deactivate/activate a call divert and your network does not allow this option, your display will tell you that the service is not available. In that case you must cancel a call diversion by selecting »Cancel«. Next time you want your incoming calls diverted, select »Register«. First Call setup (menu 1) Enter the Setup menu by pressing »MENU« Select »Call setup« · Roaming calls: If you want outgoing calls to be barred when you are connected to a foreign network (this still leaves you the possibility of making calls to your home country). Incoming calls gives you two new options to consider: · All calls: If you want to bar all incoming calls. · Roaming calls: If you want incoming calls to be barred only when you are connected to a foreign network. Status gives you the possibility of checking if your phone is barred in any of the above mentioned ways. Cancel all gives you the possibility of cancelling all of your call barrings at the same time. You will then be asked to enter the 4-digit password provided by your network operator. Call barring You can set up call barring for different types of outgoing and incoming calls to restrict the use of your phone. To make use of this service you need to get a 4-digit password from your network operator. [. . . ] If you then select »Car kit« you get two new options: »Car kit auto answer« »Car kit power off« How to fit the belt clip: Remove the label (A) on the back of the phone. The belt clip can now be fitted by means of a screwdriver. Place the label (B) on the belt clip to cover the screw. How to remove the belt clip: Remove the label (B) on the belt clip. [. . . ]