User manual BOSCH GWS 26-180 BV

[. . . ] cluttered or dark areas invite accidents. B) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. C) Keep children and bystanders away while operating a power tool. [. . . ] g) Use the power tool , accessories and tool bits etc. In accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. B Never use the machine with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Exposure to noise can cause hearing loss. B Always use the auxiliary handle supplied with the machine. loss of control can cause personal injury. B Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. This may significantly reduce the exposure level over the total working period. 1 /II We declare under our sole responsibility that this product is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 89/336/EWG, 98/37/EG, 2000/14/EG. 2000/14/EG: The guaranteed sound power level LWA is below 105 dB(A). For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Not all of the accessories illustrated or described are included as standard delivery. Typically the A-weighted noise level of the machine is: sound pressure level 89 dB(A); sound power level 100 dB(A). Overall vibrational values (vector sum of three directions) determined according to EN 60745: Chiselling: Vibration emission value ah =16 m/s2, uncertainty K=2 m/s2. Operate your machine only with the auxiliary handle 7. The auxiliary handle 7 can be set to any position for a secure and low-fatigue working posture. [. . . ] Push the chisel adjustment ring 3 forward and turn the chisel to the required position with the chisel adjustment ring 3. Release the chisel adjustment ring 3 and turn the chisel until it latches. The voltage of the power source must agree with the voltage specified on the nameplate of the machine. Power tools marked with 230 V can also be operated with 220 V. [. . . ]