User manual BOSCH IXO

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] 6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. High reaction torque can briefly occur while driving in and loosening screws. ) as well as during transport and storage, set the rotational direction switch to the centre position. unintentional actuation of the On/Off switch can lead to injuries. In case of damage and improper use of the battery, vapours may be emitted. Provide for fresh air and seek medical help in case of complaints. the vapours can irritate the respiratory system. When the battery is defective, liquid can escape and come into contact with adjacent components. Clean such parts or replace them, if required. Keep the battery charger away from rain or moisture. penetration of water in the battery charger increases the risk of an electric shock. The battery charger is suitable only for charging Bosch lithium ion batteries within the listed voltage range. Before each use, check the battery charger, cable and plug. Have repairs performed only by a qualified technician and only using original spare parts. damaged battery chargers , cables and plugs increase the risk of an electric shock. Do not operate the battery charger on easily inflammable surfaces (e. The heating of the battery charger during the charging process can pose a fire hazard. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. [. . . ] Assembly (see figures C­D) For assembly of the attachments, pull the rubber cap 3 off toward the front. Dismounting (see figures E­F) To dismount the attachments, turn the release ring 17 in rotation direction and pull the attachment off toward the front. However, this is not possible with the On/Off switch 8 actuated. Right rotation: For driving in screws, push the rotational direction switch 9 left to the stop. [. . . ]