User manual BOSCH KSF36EI40

[. . . ] 26 Switching off and disconnecting the appliance . Safety and warning information Before you switch ON the appliance please read the operating and installation instructions carefully!They contain important information on how to install, use and maintain the appliance. The manufacturer is not liable if you fail to comply with the instructions and warnings. [. . . ] Sine-controlled inverters must be used for isolated applications (e. On ships or in mountain lodges) which are not connected directly to the national grid. These operating instructions refer to several models. 13 Height-adjustable feet 14 Butter and cheese compartment 15 Shelf for tubes and small tins 16 Door shelf "EasyLift" 17 Door ventilation 18 Shelf for large bottles 4 Refrigerator compartment display Indicates the current temperature setting in the refrigerator compartment. 5 Alarm button Used to switch off the warning signal, see chapter "Alarm function". 2 Switch on the appliance with the On/Off button 1. The temperature display 4 indicates the set temperature. Light is switched on when the door is open. We recommend a factory setting of +4 °C in the refrigerator compartment. Do not store perishable food warmer than +4 °C. operating tips After the appliance has been switched on, it may take several hours until the set temperatures have been reached. Do not put any food in the appliance beforehand. If the air humidity is high, condensation may form in the refrigerator compartment, especially on the glass shelves. If this is the case, pack or wrap the food and select a lower temperature in the refrigerator compartment. Keep pressing temperature setting button 3 until the required refrigerator compartment temperature is set. The temperature in the "cool-fresh" compartment has been set to almost 0 °C at the factory and should not be changed if at all possible. If frost forms on the refrigerated food, the temperature can be increased. The door alarm (continuous sound) switches on if the appliance door is open for longer than two minutes. Close the door to switch off the warning signal. 2 Press the alarm button 5 to switch off the warning signal. The temperature can be set from +3 °C to +8 °C. Information on the usable capacity can be found inside your appliance on the rating plate. [. . . ] The "cool-fresh" compartment is too warm or too cold. The standard setting has been set too high or too low (e. If there is frost in the "cool-fresh" compartment). The temperature in the "cool-fresh" compartment can be set to be 3 steps warmer and/or colder, Fig. [. . . ]