User manual BOSCH MMB1-2000UC

[. . . ] Return appliance to an authorized service center for examination, electrical repair, mechanical repair or adjustment. · The use of attachments, including canning jars not recommended or sold by the manufacturer may cause fire, electric shock or injury. · Do not let cord hang over edge of table or counter or touch hot surfaces. · Keep hands and utensils out of the jar while blending to prevent the possibility of severe personal injury and/or damage to blender. [. . . ] Switch on the appliance: MMB 1000 UC: Move the rotary switch to the desired setting. M 0/off 1 2 Pulse switch at maximum speed, grip switch for required blending duration Stop Low speed setting Maximum speed setting MMB 2000 UC: Before use, push to extend the rotary switch. Move the switch to the desired position. M Pulse switch at maximum speed, grip switch for required blending duration 0/off Stop Variable operating speed; operating speed steplessy adjustable 3. Allway grip the edge of the lid while operating the blender. Do not grip the feed tube. 6 Adding more ingredients 1. Set the rotary switch to "0/off". Remove the lid and add more ingredients. Pour in more liquid trough the funnel in the lid. Add solid ingredients trough the filler tube in the lid. 4. Move the rotary switch to the desired position. After blending 1. Set the rotary switch to "0/off". MMB 2000 UC: also retract the rotary switch; press in the switch and release slowly. Remove the blender jug by rotating it in counter clockwise direction. Tip: It is recommended that the blender jug be cleaned immediately after use, see "Cleaning and servicing". 7 Cleaning and servicing d Warning! Never immerse the motor block and the blades in water and do not clean in the dishwasher. Note: Do not use abrasive cleaning agents as these will damage the surfaces. Wipe the motor block with a damp cloth and wipe dry. Disassemble the blender: Detach the blender motor base from the blender jug by rotating it in an counter clockwise direction. Follow the wording on the underside of the blender support. 5. Disassemble the blender support: Carefully take the blade compartment out of the blender support. 6. Carefully remove the sealing ring from the blade compartment. Disassemble the cover: Take the funnel out of the filler tube in the lid and remove the lower part of the lid. Clean the blender jug, individual parts of the lid as well as the blender motor base in the dishwasher or with normal household detergent. Clean the blade compartment and sealing ring with a brush under running water only. [. . . ] sugar or honey 1 cup apple juice 1 cup mineral water Ice cube as required 1. Peel the oranges and apples, cut into pieces 2. Blend the ingredients (except the apple juice and mineral water) at maximum speed for approx. Add the apple juice and mineral water 4. [. . . ]