User manual BOSCH MSM6700/01

[. . . ] In case of faults, please consult the service partner in your home country (see Guarantee). Warning: Avoid all contact with the beater blades, kneading hooks or the knife of the blending rod when the appliance is in All other uses or modification of the set are not intended by the manufacturer and could entail risk of damage or injury. Speed control mains cable and plug insert appliance for blending rod release button for Handmixer support housing base stand mixing bowl support release button turbo button ejection key blending rod stainless steel beater stainless steel kneading hook scraper fixing clip · Make sure that long hair, scarves, etc. Carelessness can lead to serious injury! [. . . ] Care must therefore be exercised at all times when handling the rod. The power cable must never come close to or in contact with hot parts of the appliance or other sources of heat. Never leave the mains lying on edges or corners. Warning: A damaged power cable can lead to electric shocks!Clean the attachments ( , , ) and the mixing bowl before the first use. Slide the beater blades or kneading hooks into the appliance until they are secure and you hear a distinct locking sound. Always insert the kneading hook with the cogwheel into the intended opening in the Handmixer (indicated with a cogwheel). Unlock the mixer support by pressing the support release button and fold the support upward (Fig. Remove the mixing bowl and fill with ingredients according to the quantities required (Fig. Press the support release button and fold the support down. When you are finished using the Handmixer, return the speed control to the "0" position and disconnect the plug. To clean the blending rod screw out of the inset position . The enclosed fixing clip can be used for holding the power cable. Always allow the Handmixer to rest for a few minutes after every 5 minutes of constant use ­ in particular after using the blending rod . Never keep the appliance in constant operation for more than 10 minutes!Clean only the bottom part with knife under flowing water. As soon as you release this button the motor will stop. In order to prevent overflowing, ensure that the blending vessel is never more than 2 /3 full. Make sure the plug is disconnected before cleaning the appliance. Clean the housing only with a damp cloth and if necessary with a mild cleaning agent. [. . . ] Beater blades or kneading hook can be cleaned under running water or in the dishwasher. we recommend that all attachments be cleaned directly after use. This will prevent food residues accumulating and remove the risk of germs. The packing consists of 100% environment-friendly materials, which you can dispose of at your local recycling points. [. . . ]