User manual BOSCH MUM54D00

[. . . ] Congratulations on the purchase of our ne BOCH appliance. In doing so, ou have opted for a modern, high-ualit domestic appliance. You can find further information about our products on our eb page. Before use, read these instructions carefull in order to become familiar ith important safet and operating instructions for this appliance. [. . . ] Then gentl pull the cord again and slol release; the cable is locked. If the appliance features an automatic cord inder, do not insert the cord manuall. If the cord jams, pull out the cord all the a and then allo it to ind up. Risk of injur from rotating tools Hile the appliance is operating, never place fingers in the miing bol. Attach the cover (12) before operating the appliance!Do not change tools until the drive has come to a standstill ­ hen the appliance is sitched off, the drive continues running briefl and stops in the tool change position. Do not move the sivel arm until the tool has come to a standstill. Or reasons of safet the appliance ma onl be operated hen unused drives have been covered ith drive guards (5, 8). Hisk (14) for hisking egg hites, cream and light dough, e. Sponge miture neading hook (15) for kneading heav dough and miingin ingredients that ought not be cut (e. Raisins and chocolate chips) orking ith the bol and the tools ig. Tilt the bol forards and then set it don. Turn anti-clockise until it locks into place. Depending on the processing task, insert the stirrer, hisk or kneading hook until it locks into position. Note: If using the kneading hook, rotate the dough deflector until the kneading hook can lock into position (ig. Put the ingredients to be processed into the bol. Press the Release button and move the sivel arm to position 1. Et the rotar sitch to the desired First stir in at setting 1 (1), then select setting 7 (4) ­ hisk: setting 7 (4), mi in at setting 1 (1) ­ neading hook: first stir in at setting 1 (1), knead at setting 3 (2) Adding more ingredients itch off the appliance ith the rotar sitch. Add more ingredients through the feed Press the Release button and move the sivel arm to position 2. After using the appliance itch off the appliance ith the rotar Press the Release button and move the sivel arm to position 2. Clean all parts, see "Cleaning and Do not grip the sharp blades or edges of the cutting discs. Take hold of cutting discs b the edge onl. [. . . ] The guideline specifies the frameork for an E-ide valid return and re-use of old appliances. Please ask our dealer or inuire at our local authorit about current means of disposal. The guarantee conditions for this appliance are as defined b our representative in the countr in hich it is sold. Details regarding these conditions can be obtained from the dealer from hom the appliance as purchased. [. . . ]