User manual BOSCH MUM9AD1S00

[. . . ] This appliance is intended for domestic use only. Use the appliance only for processing normal amounts of food and for normal amounts of time for domestic use. do not exceed permitted maximum quantities. X "Recipes" see page 35 The appliance is suitable for mixing, kneading and beating food. [. . . ] Note: The function "TIME" starts automatically with every use, counts the ongoing processing duration and indicates this on the display. Select the professional flexible beating whisk, professional stirring whisk or kneading hook (X "Tools" see page 28), align the lever on the protective cap to the front and insert the tool in the main drive until it locks into place. Put the ingredients to be processed in the bowl. The set processing duration will remain saved for approx. Set the rotary switch to the required setting. The remaining duration will be shown on the display and the countdown will continue. Once the remaining duration has elapsed, an acoustic signal will sound and the appliance will stop processing automatically. "FINISH TIMER" appears on the display. Note: Setting the acoustic signal X "Settings" see page 29 Clean all parts immediately after use. Press button A briefly twice to stop the The remaining duration remains saved and the countdown will continue after the appliance is switched on again. Hold down button A to switch the timer off. Using the timer without processing food: Press button A. Set the required processing duration using button + or -. Press button A briefly twice to start the On the display and the countdown will continue. Notes: ­ Press button A briefly twice to stop the timer or to start it again. If food starts to be processed while Using the timer, the appliance will continue to run until the remaining duration has elapsed and then stop processing automatically. Depending on the model, the appliance may be equipped with SensorControl Plus automatic programmes. Sensors monitor the processing of the ingredients and switch the appliance off once the pre-programmed consistency has been reached. The following automatic programmes are available with SensorControl Plus: ­ CREAM Kneading hook Ingredients and quantities according to the recipe X "Recipes" see page 35 * For appliances with integrated scales, the options "> 300 ml" and "> 700 ml" are not displayed for "CREAM". If a quantity of cream between 300 ml and 1500 ml has been added, the display shows the quantity and the appliance automatically uses the correct settings. If less or more cream is added, the displayed weight will flash. notes: ­ Before using the automatic SensorControl Plus for the first time, the kitchen machine must have been running for at least two minutes to ensure that the sensors function correctly. [. . . ] Either at the same Reduce the processing quantity. Time or for too long a Allow the appliance to cool down to If the message appears continuously, the The scales do not work properly. If the message appears continuously, the scales may be defective. The scale is exposed Do not use the appliance on worktops when The appliance has been slid on the work Lift the appliance and set down again. [. . . ]