User manual BOSCH PBH 2000 RE REV 9-2007

[. . . ] Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. E) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. [. . . ] Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Typically the A-weighted noise levels of the product are: Sound pressure level 88 dB(A); Sound power level 99 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Hammer drilling into concrete: Vibration emission value ah =11 m/s2, Uncertainty K=1. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. The machine is intended for hammer drilling in concrete, brick and stone, as well as for light chiselling work. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving. 10 Auxiliary handle 11 Depth stop 12 Key type drill chuck* 13 Extraction sleeve of the dust extraction attachment* 14 Clamping screw for the dust extraction attachment* 15 Depth stop of the dust extraction attachment* 16 Telescopic pipe of the dust extraction attachment* 17 Wing bolt of the dust extraction attachment* 18 Guide pipe of the dust extraction attachment* 19 Universal bit holder with SDS-plus shank* Rotary Hammer Article number Speed control Stop rotation Right/left rotation Delivery Scope ­ Key type drill chuck Rated power input Output power Impact rate Impact energy per stroke Rated speed Tool holder Spindle collar diameter Drilling diameter, max. : ­ Concrete ­ Steel ­ Wood Weight according to EPTA-Procedure 01/2003 Protection class mm mm mm mm kg W W bpm J rpm PBH 2000 RE 3 603 C44 3. For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. We declare under our sole responsibility that the product described under "Technical Data" is in conformity with the following standards or standardization documents: EN 60745 according to the provisions of the directives 2004/108/EC, 98/37/EC (until Dec. Before any work on the machine itself, pull the mains plug. [. . . ] To work with screwdriver bits, a universal bit holder 19 with SDS-plus shank (accessory) is required. Clean the shank end of the adapter shank and apply a light coat of grease. Insert the universal bit holder with a turning motion into the tool holder until it automatically locks. Use only screwdriver bits that match the screw head. [. . . ]