User manual BOSCH PBS75AE

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. Book Page 11 Monday, March 19, 2012 8:10 AM English | 11 Work area safety Keep work area clean and well lit. [. . . ] The tool insert can jam and lead to loss of control over the power tool. Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. product Description and Specifications Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Intended Use The machine is intended for dry sanding–with high removal capacity–of wood, plastic, metal, filler as well as varnished surfaces. Product Features The numbering of the product features refers to the illustration of the machine on the graphics page. 1 Auxiliary handle (insulated gripping surface) 2 Sanding belt* 3 Clamping lever for sanding belt 4 Thumbwheel for belt speed preselection(PBS 75 AE) 5 On/Off switch 6 Dust box, complete (Microfilter System) 7 Lock-on button for On/Off switch 8 Handle (insulated gripping surface) 9 Extraction adapter 10 Extraction outlet 11 Latching lever for dust box 12 Filter element (Microfilter System) 13 Adjustment screw for belt run 14 Protection cover 15 Dust passage *Accessories shown or described are not part of the standard delivery scope of the product. A complete overview of accessories can be found in our accessories program. Technical Data Belt Sander Article number Rated power input No-load belt speed Sanding belt length Sanding belt width Belt speed preselection Connection for internal/external dust extraction Weight according to EPTA-Procedure 01/2003 Protection class PBS 75 A 3 603 BA1 0. 750 200 – 350 533 75 W m/min mm mm kg The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary. Book Page 13 Monday, March 19, 2012 8:10 AM English | 13 Noise/Vibration Information Measured sound values determined according to EN 60745. Typically the A-weighted noise levels of the product are: Sound pressure level 93 dB(A); Sound power level 104 dB(A). The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. [. . . ] The higher the belt speed, the more material is removed and the finer the sanded surface. Only flawless sanding belts achieve good sanding capacity and make the machine last longer. Work using the least possible sanding pressure in order to increase the service life of the sanding belts. The machine’s own weight is sufficient for a good sanding performance. [. . . ]