User manual BOSCH PIA611T16E INSTALLATION INSTRUCTIONS

[. . . ] 4 en Installation Instructions Assembly over dishwasher (figure 2c) S If the hob is installed over a dishwasher, an intermediate accessory must be installed. The accessory may be ordered from our Technical Assistance Service. The reference code for this accessory is 686002. S The working surface upon which the hob is installed must be a minimum of 20 mm and a maximum of 40 mm thick. [. . . ] Use only cookware suitable for induction cooking; see the "Suitable cookware" section. Residual heat indicator The hob has a residual heat indicator for each hotplate to show those which are still hot. avoid touching a hotplate that displays this. Even when switched off, the œ/• light will remain on as long as the hotplate remains hot. If the pan is removed before the hotplate is turned off the œ/ • indicators and the selected power level will appear alternately. Programming the hob This section will show you how to program the hotplates. The table contains power levels and cooking times for several dishes. The indicator above the main switch lights up. To turn off: press the % symbol until the indicator above the main switch disappears. The residual heat indicator stays lit until the hotplates have cooled off. Note: The hob switches off automatically when all the hotplates are switched off for more than 20 seconds. 25 Switching the hob on and off The hob is turned on and off using the main switch. Set the hotplate Select the required power level with the + and - symbols. Each power level has an intermediate setting. To select the power level: The hob must be switched on. Press the + or - symbol of the required hotplate and its   display lights up ‹. In the following 10 seconds, press the + or - symbol. To change the power level, press the + or - symbol until the The default settings appear. Turning off the hotplate Press the + or - symbol until ‹ appears. The hotplate turns off and the residual heat indicator appears. Note: If no pan has been placed on the induction hotplate, the selected power level flashes. After a certain time, the hotplate switches off. [. . . ] Depending on how the pan has been manufactured, certain noises or vibrations may be produced such as those described below: A deep humming sound as in a transformer This noise is produced when cooking on a high power level. It is caused by the amount of energy transferred from the hob to the pan. The noise disappears or becomes faint when the power level is lowered. A low whistling sound This noise is produced when the pan is empty. [. . . ]