User manual BOSCH PIC675A01E

[. . . ] EN Instruction manual 03 Table of contents Important information . 5 5 5 8 Familiarising yourself with the appliance . 10 10 12 The cooking with Induction . 12 13 Main switch with childproof lock . [. . . ] You have activated the function. 25 This is how to deactivate it Carry out the following steps: 1. Press the - symbol for the zone concerned. The x d Timer function will no longer be visible. The Powerboost function has been deactivated. In certain circumstances, the Powerboost func tion may be deactivated automatically to protect the internal electronic components of the hob. This function can be used in two different ways: - to switch a hotplate off automatically - as a cooking timer A hotplate is to switch off automatically Setting procedure You enter a specific cooking time for the desired hotplate. When the cooking time has elapsed, the hotplate switches off automatically. 1. Set the heat setting on the hotplate which is to be operated with the timer function. 2. Touch the - and + symbols at the same time. The 1 indicator for the required hotplate flashes. If you select a different hotplate, touch the - and + symbols repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. Touch the - or + symbol. The default value appears. For +: 30 minutes For -: 10 minutes The 1 indicator for the hotplate flashes again. 26 4. Touch the - or + symbol until the desired cooking time appears in the timer indicator. The cooking time flashes for several seconds and then disappears. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. When the cooking time has elapsed When the cooking time has ended, the hotplate switches off. A 0 appears in the heat setting indicator. 00 flashes in the timer indicator and the 1 indicator flashes. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. Change the cooking time using the - or + symbol. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. Set the timer function to 00 using the - symbol. [. . . ] The hob is therefore fitted with a fan which runs at various speeds according to the temperature detected. The fan may also run on once the hob has been switched off if the temperature it detects is still too high. The noises described are normal and part of the induction technology and do not indicate a fault. Low humming like a transformer Quiet whistling Crackling High pitched whistle Fan noise 37 Packaging and old appliances Disposing in an environmentally responsible manner Unpack the appliance and dispose of the packaging in an environmentally responsible manner. This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). This guideline is the frame of a European wide validity of return and recycling on Waste Electrical and Electronic Equipment. After sales service Our after sales service is there for you if your hob should need to be repaired. [. . . ]