User manual BOSCH POF 1300 ACE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BOSCH POF 1300 ACE. We hope that this BOSCH POF 1300 ACE user guide will be useful to you.

Lastmanuals help download the user guide BOSCH POF 1300 ACE.


Mode d'emploi BOSCH POF 1300 ACE
Download
Manual abstract: user guide BOSCH POF 1300 ACE

Detailed instructions for use are in the User's Guide.

[. . . ] cluttered or dark areas invite accidents. B) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. C) Keep children and bystanders away while operating a power tool. [. . . ] The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Products sold in AUS and NZ only: Use a residual current device (RCD) with a rated residual current of 30 mA or less. The machine is intended for routing grooves, edges, profiles and elongated holes as well as for copy routing in wood, plastic and light building materials, while resting firmly on the workpiece. With reduced speed and with appropriate routing bits, non-ferrous alloys can also be machined. 1 Lock-off button for On/Off switch 2 Right handle 3 Spindle lock button 4 Wing bolt for guide rods of parallel guide (2x)* 5 Chip shield 6 Base plate 7 Guide plate 8 Seat for parallel guide rods 9 Step buffer 10 Dust boot 11 Wing bolt for depth stop adjustment 12 Slide with index mark 13 Depth stop 14 Scale for depth-of-cut 15 Left handle 16 Clamping lever for locking of routing depth 17 Scale for depth-of-cut fine adjustment (POF 1400 ACE) 18 Adjustment knob for depth-of-cut fine adjustment (POF 1400 ACE) 19 Mark for zeroing 20 Release lever for guide bushing 21 Router bit* 22 On/Off switch 23 Thumbwheel for speed preselection 24 Adjusting screws for step buffer (POF 1300 ACE) 25 Tightening nut with collet 26 Open-end spanner, size 19 mm* 27 Extraction hose (Ø 35 mm)* Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. A complete overview of accessories can be found in our accessories program. Plunge router Article number Rated power input No-load speed Speed preselection Constant electronic control Connection for dust extraction Tool holder Plunge depth Weight according to EPTA-Procedure 01/2003 Protection class mm inch mm kg 6/8 ¼ 55 3. For lower voltage and models for specific countries, these values can vary. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Before any work on the machine itself, pull the mains plug. Dusts from materials such as lead-containing coatings, some wood types, minerals and metal can be harmful to one's health. Touching or breathing-in the dusts can cause allergic reactions and/or lead to respiratory infections of the user or bystanders. Certain dusts, such as oak or beech dust, are considered as carcinogenic, especially in connection with wood-treatment additives (chromate, wood preservative). Materials containing asbestos may only be worked by specialists. It is recommended to wear protective gloves when inserting or replacing router bits. Depending on the application, router bits are available in the most different designs and qualities. ­ Provide for good ventilation of the working place. Mounting the Extraction Adapter The extraction adapter 28 can be mounted with the hose connection to the front or to the rear. When mounting with the hose connection in front, the chip shield 5 must be removed first. Fasten the extraction adapter 28 with the two knurled screws 29 to the base plate 6. [. . . ] Place the machine with the guide-rail adapter 35 mounted onto the guide rail. Because of the projecting height of the guide bushing, the template must have a minimum thickness of 8 mm. Actuate the release lever 20 and insert the guide bushing 43 from below into the base plate 6. ensure that the encoding keys clearly engage in the grooves of the guide bushing. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BOSCH POF 1300 ACE

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BOSCH POF 1300 ACE will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag