User manual BOSCH PSB 18 LI-2 REV 1-2010

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] A workpiece clamped with clamping devices or in a vice is held more secure than by hand. Dust from light alloys can burn or explode. Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. In case of damage and improper use of the battery, vapours may be emitted. Provide for fresh air and seek medical help in case of complaints. the vapours can irritate the respiratory system. Use the battery only in conjunction with your Bosch power tool. This measure alone protects the battery against dangerous overload. Use only original Bosch batteries with the voltage listed on the nameplate of your power tool. Imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. The machine is intended for driving in and loosening screws as well as for drilling in wood, metal, ceramic and plastic, and for impact drilling in brick, concrete and stone. A complete overview of accessories can be found in our accessories program. Combination Cordless Drill Article number Rated voltage No-load speed ­ 1st gear ­ 2nd gear Max. Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary. Measured sound values determined according to EN 60745. Typically the A-weighted noise levels of the product are: Sound pressure level 89 dB(A); Sound power level 100 dB(A). Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah <2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ] Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under: www. Com Our customer service representatives can answer your questions concerning possible applications and adjustment of products and accessories. Apply the power tool to the screw only when it is switched off. [. . . ]