User manual BOSCH PSR 14 4 LI-2

[. . . ] cluttered or dark areas invite accidents. B) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. C) Keep children and bystanders away while operating a power tool. [. . . ] C) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. shorting the battery terminals together may cause burns or a fire. D) Under abusive conditions, liquid may be ejected from the battery; avoid contact. if contact accidentally occurs , flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. High reaction torque can briefly occur while driving in and loosening screws. Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. The trade names of the individual machines may vary. Typically the A-weighted sound pressure level of the machine is lower than des 70 dB(A). While working, the noise level can exceed 85 dB(A). Overall vibrational value (vector sum of three directions) determined according to EN 60745: Drilling in metal: Vibrational emission value ah =<2. WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet. This could lead to a significant underestimate of exposure when the tool is used regularly in such a way. Note: To be accurate, an estimation of the level of exposure to vibration experienced during a given period of work should also take into account the times when the tool is switched off and when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. ) as well as during transport and storage, set the rotational direction switch to the centre position. unintentional actuation of the On/Off switch can lead to injuries. [. . . ] The locking is released again to remove the tool when the collar is turned in the opposite direction. The indicator for right rotation 4 lights up when the On/Off switch 12 is actuated and the motor is running. Left Rotation: For loosening or unscrewing screws, push the rotational direction switch 11 right to the stop. The indicator for left rotation 5 lights up when the On/Off switch 12 is actuated and the motor is running. [. . . ]