User manual BOSCH PSR 14,4 VE-2

[. . . ] cluttered or dark areas invite accidents. B) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. C) Keep children and bystanders away while operating a power tool. [. . . ] D) Under abusive conditions, liquid may be ejected from the battery; avoid contact. if contact accidentally occurs , flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fastener may contact hidden wiring. Cutting accessory and fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. damaging a gas line can lead to explosion. Vibration total values (triax vector sum) determined according to EN 60745: Drilling into metal: Vibration emission value ah <2, 5 m/s2, Uncertainty K =1 m/s2, Screwdriving: Vibration emission value ah <2, 5 m/s2, Uncertainty K =1 m/s2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. the declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. A battery that is new or has not been used for a longer period does not develop its full capacity until after approx. The battery is equipped with a NTC temperature control which allows charging only within a temperature range of between 0 °C and 45 °C. [. . . ] Select a higher setting or switch to the " " symbol when unscrewing screws. gear Selection , Mechanical Actuate the gear selector 3 only when the machine is at a standstill. Two speed ranges can be preselected with the gear selector 3. Gear I: Low speed range; for screwdriving or working with large drilling diameter. [. . . ]