User manual BOSCH PSR 14.4V

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. Nicht mehr gebrauchsfähige Akkus/Batterien können direkt abgegeben werden bei: Deutschland Recyclingzentrum Elektrowerkzeuge Osteroder Landstraße 3 37589 Kalefeld Schweiz Batrec AG 3752 Wimmis BE Akkus/Batterien: Work area safety  Keep work area clean and well lit. [. . . ] Penetrating a water line causes property damage. ς Switch off the power tool immediately when the tool insert jams. Be prepared for high reaction torque that can cause kickback. The tool insert jams when: — the power tool is subject to overload or — it becomes wedged in the workpiece. ς Hold the machine with a firm grip. High reaction torque can briefly occur while driving in and loosening screws. A workpiece clamped with clamping devices or in a vice is held more secure than by hand. ς Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the power tool. ς Use only original Bosch batteries with the voltage listed on the nameplate of your power tool. Imitations, reconditioned batteries or other brands, there is danger of injury as well as property damage through exploding batteries. Book Page 11 Friday, June 28, 2013 4:42 PM English | 11 Product Description and Specifications Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Noise/Vibration Information Measured sound values determined according to EN 60745. Typically the A-weighted sound pressure level of the product is 75 dB(A). The noise level when working can exceed 80 dB(A). Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60745: Drilling into metal: ah <2. The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. [. . . ] Maintenance and Service Maintenance and Cleaning  Before any work on the machine (e. ) as well as during transport and storage, set the rotational direction switch to the centre position. Unintentional actuation of the On/Off switch can lead to injuries. ς For safe and proper working, always keep the machine and ventilation slots clean. [. . . ]