User manual BOSCH PWS850

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. Work area safety  Keep work area clean and well lit. [. . . ] A complete overview of accessories can be found in our accessories program. noise/Vibration Information Sound emission values determined according to EN 60745-2-3. Typically the A-weighted noise levels of the product are Sound pressure level Sound power level Uncertainty K Wear hearing protection!Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 60745-2-3: Surface grinding: ah K Disk sanding: ah K Sound emission values determined according to EN 60745-2-3. Typically the A-weighted noise levels of the product are Sound pressure level Sound power level Uncertainty K Wear hearing protection!Book Page 21 Tuesday, June 30, 2015 8:17 AM English | 21 Sound emission values determined according to EN 60745-2-3. Typically the A-weighted noise levels of the product are Sound pressure level Sound power level Uncertainty K Wear hearing protection!5 The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period. An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Technical Data Angle Grinder Article number Rated power input Rated speed Grinding disc diameter, max. thread of grinder spindle Thread length (max. ) of grinder spindle Restarting Protection Weight according to EPTA-Procedure 01:2014 – with vibration-damping auxiliary handle – with standard-auxiliary handle Protection class PWS . 7 /II The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary. Book Page 22 Tuesday, June 30, 2015 8:17 AM 22 | English Angle Grinder Article number Rated power input Rated speed Grinding disc diameter, max. thread of grinder spindle Thread length (max. [. . . ] Com Disposal The machine, accessories and packaging should be sorted for environmental-friendly recycling. Do not dispose of power tools into household waste!Only for EC countries: According to the European Directive 2012/19/EU for Waste Electrical and Electronic Equipment and its implementation into national right, power tools that are no longer usable must be collected separately and disposed of in an environmentally correct manner. Book Page 36 Tuesday, June 30, 2015 8:17 AM 36 | Français – Dévissez complètement les 4 vis (voir figure B). [. . . ]