User manual BOSCH QUIGO

[. . . ] The measuring tool is provided with a warning label in German (location, see "Symbols", page 10). Before putting into operation for the first time, attach the supplied sticker in your national language over the German text on the warning label. Do not direct the laser beam at persons or animals and do not stare into the laser beam yourself. [. . . ] Avoid heavy impact to or falling down of the measuring tool. Damage to the measuring tool can impair its accuracy. After heavy impact or shock, compare the laser line with a known horizontal or vertical reference line. When switching on the measuring tool, do not direct the laser beam at persons or animals and do not stare into the laser beam yourself. Immediately after switching on, the measuring tool sends laser beams out of the exit opening. switch the measuring tool off during transport. When switching off, the levelling unit, which can be damaged in case of intense movement, is locked. Do not leave the switched on measuring tool unattended and switch the measuring tool off after use. Other persons could be blinded by the laser beam. Always use the centre of the laser line for marking. The width of the laser line changes with the distance. In case of ground vibrations or position changes during operation, the measuring tool is automatically levelled in again. To avoid errors, check the position of the horizontal and vertical laser line with regard to the reference points upon re-levelling. The following symbols are important for reading and understanding the operating instructions. [. . . ] Com Our customer service representatives can answer your questions concerning possible applications and adjustment of products and accessories. Box 2054 Bangkok 10501, Thailand Bosch Service ­ Training Centre 2869-2869/1 Soi Ban Kluay Rama IV Road (near old Paknam Railway) Prakanong District 10110 Bangkok Thailand Tel. Do not dispose of measuring tools and batteries/rechargeable batteries into household waste! [. . . ]