User manual BOSCH SENSIXX B2 SECURE

[. . . ] If it is absolutely necessary to use an extension cable, make sure that it is suitable for 16A and has a socket with an earth connection. € If the safety fuse fitted in the appliance blows, the appliance will be rendered inoperative. To restore normal operation the appliance will have to be taken to an authorised Technical Service Centre. € In order to avoid that, under unfavourable mains conditions, phenomena like transient voltage drops or lighting fluctuations can happen, it is recommended that the iron is connected to a power supply system with a maximum impedance of 0. [. . . ] Do not forget to empty the tank when you have finished ironing. It will disappear in a short period of time, after the first usage. €Secure” auto shut-off function 8 The pilot light does not switch on. € •• ••• Synthetics Silk – Wool Cotton – Linen Filling the water tank  et the steam regulator to the “0”position and S unplug the iron from the mains!Use only clean water from the tap without mixing anything with it. The addition of other liquids, such as perfume, will damage the appliance. Any damage caused by the use of the aforementioned products, will make the guarantee void. Do not use condensation water from tumble dryers, air conditionings or similar. This appliance has been designed to use normal tap water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. Shot of steam Set the temperature dial in the max position Interval between shots of steam should be 5 sec. Cleaning Tips to help you save energy Vertical steam Do not iron clothing while it is being worn!Never direct the steam at persons or animals!Important warnings Do not allow the power cord to come into contact with the soleplate when it is hot. Do not use descaling agents (unless they have been advised by Bosch), they can damage the appliance. Never use abrasive products to clean the soleplate or any other part of the appliance. To keep the soleplate smooth, you should avoid hard contact with metal objects. Never use a scouring pad, or chemicals to clean the soleplate. Before using the iron for the first time With the iron unplugged, fill in the tank of the iron with tap water and set the temperature dial to “max” Plug in the appliance to the mains. When the steam iron has reached the desired temperature (pilot light switches off), start steaming by setting the steam regulator to “2” and by repeatedly pressing the button . When using the steam function for the first time, do not apply it on the laundry, as there could still be dirt in the steam dispenser. [. . . ] Check the recommended ironing temperature in the label on the garment. € Regulate the steam according to the selected ironing temperature, following the instructions in this manual. € Try to Iron the fabrics while they are still damp and reduce the steam setting. Steam will be generated from the fabrics rather than the iron. [. . . ]