User manual BOSCH SGE09A05

[. . . ] Household Appliances Internet: http://www. bosch-hausgeraete. de Bosch Info-Team: DE Tel. DTAG) 5600 053 969 (8301) en Instructions for Use en Index 4 6 7 8 9 10 11 12 15 17 Adjusting the appliance . 18 19 20 25 27 29 32 32 33 Safety instructions . Getting to know your dishwasher Before using your appliance for the first time . [. . . ] If the Buzzer volume option is selected, "Buzzer 4" is displayed (factory setting). You can select value 0 (buzzer switched off) or values from 1 (quiet) to 6 (loud). Buzzer is emitted briefly, indicating the volume which corresponds to the value just selected. Water hardness Before using the appliance for the first time or if the water hardness changes, the dishwasher softening system must be adjusted to the degree of hardness of your tap water. Proceed as described in the chapter "Adjusting the softening system". Reduce time You can reduce the running time of automatic programmes. An optimum cleaning result is still obtained as both the water and energy consumption is increased. If the Reduce time option is selected, "Reduce time: Off" (factory setting) is displayed. Return to the main menu and start the selected programme. If you do not want to use Reduce time the next time you use the dishwasher, you must switch off the option again. 21 en Language Before using the appliance for the first time, you can change the selected language (see chapter "Before using the appliance for the first time"). If the Language option is selected, several language codes are displayed. The code of the currently selected language flashes. A total of 17 codes or languages can be selected. If selecting a language code, the clear text is displayed on the lower line in the corresponding language. Standard programmes In addition to the wash programmes which can be selected from the main menu, the following standard programmes can be selected in turn from the "Normal" programme: Normal Extra ­ Normal Eco ­ Normal ­ Normal Plus. Select the desired programme and return to the main menu. If you do not want to select any of the displayed standard programmes, return to the "Standard programmes" display and then to the main menu by pressing . the "Back" button If you would like to cancel the selection of a standard programme, select the Standard programmes option. Then simultaneously press the "Main menu" button and button or button . The selected standard programme is then deleted. The main menu and "Auto Wash" programme are displayed. Normal Extra Normal Eco Normal Normal Plus Type of utensil Amount of food remains Condition of food remains Mixed utensils Small to large Slightly adhesive The associated programme data (duration, energy and water consumption) can be found in the summary of instructions. We strongly recommend that you use the automatic programmes as the energy and water consumption is kept as low as possible on account of the variable programme sequence. However, the programme sequence of the standard programmes is fixed. 22 en Aqua sensor * * on applicable models The Aqua sensor is an optical measuring device which measures the turbidity of the rinsing water. A light barrier can detect dissolved food remnants in the water, e. g. The Aqua sensor is used according to the programme. [. . . ] Flow rate: Minimum of 10 litres per minute. Water temperature: We recommend that you use cold water. If you do use hot water, the temperature should not exceed 60 °C. Transportation Empty the dishwasher according to the following steps: Turn on the tap. Start any automatic programme and close the appliance door. [. . . ]