User manual BOSCH SMI 40D06EU/20 SUPPLEMENT

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. [. . . ] Fill up the rinse aid dispenser with rinse aid. · The activation/deactivation of the rinse aid dispenser can only be possible with the "Multi-Tab function" active. Activation/deactivation of the rinse aid dispenser 1. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. Press button B, the lights of buttons A and C turn off while the light of button = Rinse B goes on flashing. The digital display indicates the current setting: aid dispenser deactivated. To change the setting, press button B again, the digital display indicates the = Rinse aid dispenser activated. To memorise the operation, switch off the dishwasher by pressing the On/Off button. If you decide to turn back to the use of standard detergent system we advise that you: 1. Deactivate the "Multi-Tab function". Fill up the salt container and the rinse aid dispenser again. The number in the display is no longer flashing but fixed with static light. The countdown will decrease with steps of 1 hour. The opening of the door will interrupt the countdown. Once the delay start has elapsed the programme will start automatically. With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the programme in progress indicator light will illuminate. The selection of the washing programme and delay start can also occur with the door closed. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically. Cancelling the "delay start" and / or a washing programme · To cancel a delay start in progress you have to reset the dishwasher. · Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again. [. . . ] Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. [. . . ]