User manual BOSCH SMS69N48EU

[. . . ] SM… SB… en Table of contents Intended use . 4 Before you switch ON the appliance Delivery. . 4 . 5 . 5 . 6 . 6 . 6 . 7 . 7 Unloading the dishwasher . 20 Express WaschPlus/ SpeedPerfectPlus (VarioSpeedPlus) . [. . . ] This will prevent steam from escaping and causing longterm damage to your built-in furniture. 1. On the digital display )* is indicated : . Switch off ON/OFF switch (. Changing the programme When the START button h has been pressed, the programme cannot be changed. The only way a programme can be changed is by Cancel programme (Reset). Intensive drying The final rinse uses a higher temperature which improves the drying result. Hold down programme button # and press START button h until the digital display )* : . . . The LED for button # flashes and the digital display )* displays the factory setting : . Press programme button # until the factory set value : is indicated on the digital display )*. Interrupting the programme 1. If the door was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the appliance. To continue the programme, switch on the ON/OFF switch ( again. 23 en Cleaning and maintenance Never use a steam cleaner to clean your dishwasher. The manufacturer is not liable for any consequential damage. Regularly wipe the front of the appliance and fascia with a damp cloth; water and a little washing up liquid are adequate. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces. Stainless steel appliances: To prevent corrosion, avoid using sponge cloths or wash them out thoroughly several times before using for the first time. To change the setting, 1. Press the button 3 to switch the Intensive drying on : or off : . The set value is saved. Cleaning and maintenance gC ne i nl a d n a en cm nti aa e A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems. m Warning – Health hazard Never use other domestic detergents, e. g. containing chlorine! Overall condition of the machine Check spray arm for grease and limescale deposits. If you find such deposits: Fill detergent dispenser with detergent. Start the appliance without utensils in the programme with the highest rinsing temperature. Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers. To ensure that the door seal always remains clean and hygienic, regularly clean it with a damp cloth and a little washing-up liquid. [. . . ] The socket must be near the appliance and freely accessible following installation. If the plug is not freely accessible, an allpole disconnector with a contact opening of at least 3 mm must be fitted on the installation side to satisfy the relevant safety instructions. The connection may be modified by technicians only. A power cord extension may be purchased from customer service only. * depending on model The dishwasher can be connected to cold or hot water up to max. [. . . ]