User manual BOSCH TDS2021GB

[. . . ] sensixx B20L Operating instructions en Description 1. Water tank 2 Removable iron pad 3 Steam hose storage fixing 4 Carrying handles 5 Mains cable storage compartment 6 Mains cable 7 Steam hose 8 “Energy Saving” button * 9 “Steam ready” pilot light 10 Variable steam control * 11 “Refill water tank” pilot light 12 Illuminated main power button (0/I) 13 Housing with internal steam generator 14 Temperature control knob 15 Steam release button “Pulse steam”. 16 Steam release button “Ultimate Steam” * 17 Iron pilot light 18 Soleplate * Model dependent  en Thank you for buying the B20L professional steam station, the new professional steamironing system from Bosch. These instructions contain valuable information about the unique features of this iron and some hints to make ironing easier for you. Please visit www. bosch-home. co. uk for more product information or to register your product, just follow the link to the Online guarantee registration. [. . . ] 1. Set the temperature selector (14) on “• • •” 2. Press the steam release button (15) on the bottom of the handle two times shortly (double-click). or (model dependent) Shortly press the steam release button (16*) on the top of the handle. Remark : It is possible to stop the shots of steam by pressing the steam button shortly again. Intelligent steam (model dependent) This system has intelligent steam control, which, after releasing the steam release button (15), provides a small amount of additional steam. The additional steam can always be stopped by briefly pressing the steam release button once again. Ironing without steam 1. Begin ironing but without pressing the steam release button. Vertical steam 1. Set the temperature control to the “•••” or “max” position. 2. You can steam iron curtains and hanging garments (jackets, suits, coats. . . ) by placing the iron in a vertical position and pressing the steam release button. “Ultimate steam” function (model dependent) The “Ultimate steam” function helps to de-crease more stubborn materials found in garments like Jeans or linen tablecloth. When activating the “Ultimate steam” button (16*) the steam generator produces an extra amount of steam. The function should be used during intervals of a few seconds, to be the most effective. 1. set the temperature selector (14) on “•••” 2. press the “Ultimate steam” button (16*). Important: • The steam hose may get hot if you are ironing for long periods. • Note: Some water drops may appear when you use the “Pulse steam” or the “Ultimate steam” function for the first time. The water drops will disappear after you have used the function for some time. Never direct the steam jet at garments that are being worn. Never aim the steam at people or animals. Energy saving “eco” button (model dependent) If the “Energy saving” button (8*) is switched on, the energy consumption of the appliance will be reduced, by means of an automatic reduction of electricity and water consumption. A good ironing result will still be obtained for most of the garments. * model dependent  en Use the normal energy setting for thick and highly wrinkled fabrics. Note: If you work with the “Energy saving” function, the variable steam regulation and temperature regulation can still be used as recommended. Additional accessories (model dependent) Fabric protection soleplate cover The fabric-protection soleplate cover is used for steam ironing delicate garments at maximum temperature without damaging them. Use of the soleplate cover also does away with the need for a cloth to prevent shine on dark materials. It is advisable to first iron a small section on the inside of the garment to see if it is suitable. To attach the soleplate cover to the iron, place the tip of the iron into the end of the soleplate cover and pull the elastic strap over the lower rear of the iron until it fits tightly. To release the soleplate cover, pull the elastic strap and remove the iron. The fabric-protection soleplate cover may be purchased from the customer service or specialist shops: Accessory code (After-sales) 571510 Name of accessory (Specialist outlets) TDZ2045 Cleaning & Maintenance Always unplug the appliance from the mains supply before carrying out any cleaning or maintenance operation on it. 1. After ironing, pull out the plug and allow the appliance to cool down before cleaning. 2. Wipe the housing, handle and iron body with a damp cotton cloth. 3. If the soleplate is soiled with dirt or scale, clean it with a damp cotton cloth. [. . . ] • If the sound will not stop, do not use the steam generator and contact an authorised technical service centre. Dirt comes out • There is a build-up of scale or through the sole plate. • Chemical products or additives have been used. • The boiler is not switched on or the water tank is empty. • The steam regulator is set to the minimum position. The ironed gar­ ent m • The selected temperature is turns dark and/or too high and has damaged the sticks to the soleplate. [. . . ]