User manual BOSCH TDS6030

[. . . ] * Modellabhängig BOSCH 13 DEUTSCH Problem Mögliche Ursachen Lösung EN • Operating instructions General safety instructions ❐❐ During the use, the decalcifying or rinsing aperture of the boiler is under pressure and must not be opened. ❐ The appliance must not be left unattended while it is connected to the supply mains. ❐ Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use. ❐ The appliance must be used and placed on a stable surface. [. . . ] 2 1 “PulseSteam” function This appliance has a special function for tackling difficult creases. €1  Press the steam release button (14) two times in quick succession (double-click). powerful shots of steam will be released. 2x Vertical steam Can be used to remove creases from hanging clothes, curtains, etc. €1  Hold the iron in an upright position 15 cm away from the garment to be steamed. €2  Press the steam release button (14) repeatedly with pauses of at least 5 seconds. : never point the steam jet at garments being worn, or at people or animals. Energy saving If the energy saving setting is selected, you can save energy and water and still achieve good results when ironing most of your garments.  1  Press the energy saving button “Eco” (4). €2  To switch back to the normal energy setting, press the “Eco” button again. It is advisable to use the normal energy setting to get optimum results on thick and very wrinkled fabrics. 17 * Model dependent BOSCH 3x 5. Auto switch off For your safety and to save energy, the appliance switches off automatically when it has not been used for 8 minutes. Three beeps will be heard, and all indicator lights (1, 2, 3, 4) will flash. €1  To switch the steam station back on, press the steam release button (14) again. eNGLISH Cleaning & Maintenance 3x 1. Descaling process Important: to keep your appliance in good condition for a long time, you should carry out the descaling process after a period of use. The “Calc'nClean” indicator light (2) will flash and three beeps will be heard, indicating that the process should be performed. 2h Descaling the boiler  1  Press the button (1) to switch the appliance off. Unplug the appliance and let it cool down for at least 2 hours. €3  Remove the iron from the pad (12). €4  Unscrew and remove the boiler cap (8) and take it out. [. . . ] Trouble shooting Problem The iron begins to smoke when switched on. During first use: certain components on the appliance have been lightly greased at the factory and may produce a small amount of smoke when initially heated. During subsequent use: the soleplate may be soiled. This is completely normal and will stop after a short while. [. . . ]