User manual BOSCH TDS6150

[. . . ] Keep the appliance and its cord out of reach of children under 8 years of age when it is turned on or cooling down. This appliance is designed only for household use up to 2000m above sea level. Surface is liable to get hot during use. 14 BOSCH * Model dependent Important notices • Carefully read through the operating instructions for the appliance and safeguard them for future reference. [. . . ] Auto switch off 3x For your safety and to save energy, the appliance switches off automatically when it has not been used for 8 minutes. Three beeps will be heard, and all indicator lights (1, 2, 3) will lash. 1 To switch the steam station back on, press the steam release button (13) again. 18 BOSCH * Model dependent Calc’nClean Easy Cleaning & Maintenance This appliance is equipped with an automatic clean warning indicator, which indicates that scale particles must be removed from inside the steam chamber. When activated, three beeps will be heard and the “Calc'nClean” indicator light (1) will lash, indicating that the process should be performed. Once this time has passed, you will only be able to dry iron (without steam). To start steam ironing again, follow this descaling process: 1 2 3 4 5 Fill the tank (7) with water. Plug in the mains cable (5) and press the button (2) to switch the appliance on. Press the descaling button (1) for 2 seconds. Its indicator light will remain permanently lit. Wait until the indicator light (2) stops lashing and remains lit permanently. Place the iron on the "Calc'nClean" container (14). Make sure that the surface on which the container is placed is stable. 3x 2” 2x Warnings: • Do not remove the iron from the container until the process has inished. Boiling water and steam will be released through the soleplate, removing limescale and/or deposits that may be inside. € The container must only be used to perform the descaling process. It must not be used as a stand for the iron while ironing. 6 Press the steam release button (13) for 2 seconds. the descaling process will start automatically. During this process, short beeps will be heard. After approximately 3 minutes, the iron will stop releasing steam. A long beep will be heard, indicating that descaling process has inished. [. . . ] If the above tips do not solve the problem, get in touch with our customer service. You can download this manual from the Bosch local homepages. For at undgå farlige situationer skal enhver form for reparation, som apparatet måtte have brug for som f. Energibesparelse Når indstillingen energibesparelse er valgt, kan du spare energi og vand og stadig opnå gode strygeresultater for de leste tekstiltyper. [. . . ]