User manual BOSCH UNEO

[. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. [. . . ] ) as well as during transport and storage, set the rotational direction switch to the centre position. unintentional actuation of the On/Off switch can lead to injuries. In case of damage and improper use of the battery, vapours may be emitted. Provide for fresh air and seek medical help in case of complaints. the vapours can irritate the respiratory system. The battery charger is suitable only for charging Bosch lithium ion batteries within the listed voltage range. Before each use, check the battery charger, cable and plug. Have repairs performed only by a qualified technician and only using original spare parts. damaged battery chargers , cables and plugs increase the risk of an electric shock. Do not operate the battery charger on easily inflammable surfaces (e. The heating of the battery charger during the charging process can pose a fire hazard. Children should be supervised to ensure that they do not play with the battery charger. Products sold in GB only: Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. the replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Keep the battery charger away from rain or moisture. It is also suitable for drilling without impact in wood, metal, ceramic and plastic. Machines with electronic control and right/left rotation are also suitable for screwdriving. Use the battery charger only when you fully understand and can perform all functions without limitation, or have received appropriate instructions. [. . . ] For safe and proper working, always keep the machine and ventilation slots clean. ) as well as during transport and storage, set the rotational direction switch to the centre position. unintentional actuation of the On/Off switch can lead to injuries. A damaged dust protection cap should be changed immediately. [. . . ]