User manual BOSCH WFW3231

[. . . ] washing machine en Instruction Manual and Installation Instructions Table of Contents Your Bosch washing machine . Protection of the environment / Hints and tips . Introducing your washing machine Control panel . Before using your washing machine for the first time . [. . . ] The "Start/Stop" indicator light flashes. q Press the "Settings" button. q Press the "- Childproof lock" button. The childproof lock / appliance lock is permanently deactivated. i If the childproof lock / appliance lock is permanently deactivated, the "$" sym bol on the display panel goes out. q Press and hold down the "Start/Stop" button (4 seconds) until the "Start/ Stop" control light flashes. q Press the "Options" button or the but ton with the "Options" symbol(s). q Press the "Settings" button. q Press the "- Childproof lock" button. The childproof lock / appliance lock is permanently deactivated. Temporarily deactivate childproof lock / appliance lock Permanently deactivate childproof lock / appliance lock (no programme active) Permanently deactivate childproof lock / appliance lock (programme active) 32 Resetting standard settings You can reset standard settings which have been changed (exception: time). There are two options available for reset ting standard settings. i Settings cannot be reset while a pro gramme is running. Option 1 Changes to the childproof lock and si gnal are cleared, the childproof lock is deactivated and the memory locations are deleted. 4 seconds simultaneously press the upper and lower buttons on the right side of the display panel. New status: Memory1, 2, 3: Childproof lock: Signal: Empty OFF 4 Return to the programme page. Option 2 Changes to the childproof lock and si gnal are cleared, the childproof lock is deactivated and the memory locations are deleted. The language of the text on the display panel must be reselected. 4 seconds simultaneously press the upper and lower buttons on the left side of the display panel. New status: Memory1, 2, 3: Childproof lock: Signal: Empty OFF 4 Return to the language selection. 33 Changing the programme sequence Changing selected settings While the selected programme is running, the spin speed can be changed and addi tional options (exception: Prewash") can be switched on or off. q Press the "Change" button. q Press the Spin speed" button until the desired spin speed is displayed. or q Press the "Options" button and switch additional options on or off. 34 If "Childproof lock: ON" preselected q Press the "Start/Stop" button for ap prox. The "Start/Stop" indi cator light flashes. When the required changes have been made: q Press the "Start/Stop" button. The "Start/Stop" control light comes on. [. . . ] Loud noise generation, vibrations and "wandering" may be due to incorrect alignment! 58 Connecting the power Warning Connect the washing machine only to an alternating current via a correctly installed earthed socket. The mains voltage and the voltage speci fications on the washing machine (rating plate) must correspond. Connected load and the required fuse are indicated on the rating plate. Ensure that: - The mains plug and socket are com patible, - The cable cross section is adequate, - The earthing system has been installed correctly. [. . . ]